What Flange Fits Valterra Street DWV Fitting # D50-2880
Updated 05/18/2020 | Published 05/14/2020
Products Featured in This Question
Question:
Which Valterra RV sewer grey water flange should be used with the 1-1/2 street elbow p/n: D50-2880? There is a leak at the connection of the street elbow coupling and 1-1/2 pipe. I would like to replace with a new flange, street elbow and coupling. Attached are photos of the current setup. Thanks,
asked by: Tom S
0
Expert Reply:
The part # D50-2880 has an outer diameter of 1-1/2 inch so the correct flange you'd need to fit it is the part # T1005-1. You'll need ABS solvent part # A05-0303 too and you'd be set.
expert reply by:
Jameson C
0
click to enlarge
Product Page this Question was Asked From
Valterra RV Sewer Slip Hub with Flange - 2"
- RV Sewer Hose Fittings
- Sewer Pipe Fittings
- Flange Fittings
- Hub
- Sewer Pipe to Waste Valve
- 2 Inch Diameter
- Valterra
more information >
Continue Researching
- Q&A: Replacement 1-1/2 Inch Hub and Valve for Valterra T80 Double RV Waste Valve Elbow
- Video: Hands-On with the Valterra RV Sewer Slip Hub with Flange
- Video: An In-Depth Look at the Valterra RV Sewer Slip Hub with Flange
- Video: What to Know About the Valterra RV Sewer Spigot with Flange
- Shop: Valterra RV Sewer Slip Hub with Flange - 2"
- Shop: Valterra RV Sewer Slip Hub with Flange - 1-1/2"
- Shop: Valterra RV Sewer Spigot with Flange - for 1-1/2" pipe
- Q&A: Recommended Sewer Slip Hub Pipe Connection
- Q&A: Mounting Hole Spacing of Valterra Bladex Waste Valve Body T1002VPM
- Q&A: Troubleshooting Installation of B&W Companion 5th Wheel Hitch in 2001 GMC 2500
- Q&A: Recommended Replacement for a Shurflo 4900-0201 Water Pump
- Q&A: What is Difference Between RV Waste Valves Hubs and Spigots
- Q&A: How Much Does The MORryde Cushioned 5th Wheel Pin Box MR84VR Weigh?
- Article: Roof Rack Information