Bearing Kit Recommendations for 1989 Load Rite Boat Trailer with Seal 12194TC and Bearing L44649

Updated 04/10/2019 | Published 04/09/2019

Products Featured in This Question

Replacement Trailer Wheel Bearing - L44649 - Qty 1

(2224)

$24.84

Grease Seal - Double Lip - I.D. 1.249" / O.D. 1.983" - 2,000-lb to 2,200-lb Axles - Qty 1

(711)

$5.88

Replacement Spindle Washer - Tang Type for E-Z Lube

(778)

$5.60

D Washer for EZ Lube Spindles

(261)

$5.79

Replacement Race L44610 for Bearings L44643 and L44649 - Qty 1

(1322)

$5.30

Question:

I have a 1989 Load Rite boat trailer for a 17’ aluminum boat. The number on the grease seal is 12194TC and the inner and outer bearings are the same L44649. There were no washers when I took it apart but it is a round spindle with flat spot for a tang washer, I would need a regular one. Do you have a kit that can take care of me? Thank you

asked by: Brad G

Expert Reply:

I did some research and found that the 12194TC seal you said you have measures 1.250 inside diameter, and 1.979 outside diameter. The seal I recommend is part # 34823. The dimensions listed for this seal are 1.249 inside diameter and 1.983 outside diameter. We don't have a bearing kit with everything you need so your best bet is to go with the bearing numbers # L44649, the seal # 34823, the races part # L44610 for each bearing (if needed) and then for a spindle washer it sounds like you are looking for the part # 5-101.

For a similar D washer without the tangs we have the parat # 5-23.