Replacement Control Module for Coach Step Model 725-0041

Question

Question:

725-0041 coach step control Need the cross reference for the above control module

asked by: Don

0

Expert Reply:

I spoke with my contact at Lippert and he said the correct replacement control module for your existing Coach model 725-0041 is the part # LC301702. He said this is an exact replacement part and will work perfectly.

expert reply by: Chris R

0

Answer 1

I have previously confirmed with the manufacturer that the correct replacement control module for Coach Step 725-0042 is the Replacement Control Module for Lippert Electric Coach Step #LC301702. I have added a link to a video review for you to check…

view full answer...

Answer 2

I checked with Lippert and the correct replacement control module for your the Coach model 725-0041 steps on your 2006 Monaco Camelot is the item #LC301702 you were looking at. This is an exact replacement part and will work perfectly. For…

view full answer...

Answer 3

The 725-0041 is the Lippert Coach Step single step, and we do have the replacement motor and gear for your steps; what you will need are the following: - Replacement Motor for Lippert Electric Coach Step #LC301695 - Replacement Gear for Lippert…

view full answer...

Answer 4

The correct replacement for your 300-1406 motor is the Replacement Motor for Lippert Electric Coach Step part #LC301695. If you need other components I would need more info on the steps as this specific motor fits quite a few different steps. If…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 9

Hey Ed, just the breakaway switch portion of the Curt RVibrake 4 part #RVI44FR is the same as what would have came on your Patriot but the wiring it connects to that plugs into the unit is different so you'd have to do some splicing as long as…

view full answer...

Answer 10

Hello Henry, thanks for reaching out. Yes, the ClearPlus 79 Series HD Windshield Wiper Blades #CP67WR will indeed fit your 2016 Entegra Anthem. That coach uses two 40" blades and that is exactly what comes with the #CP67WR.

view full answer...

Answer 11

Hey Chris, yes the part #MC62YR does have the 50.336 motor like you are looking for.

view full answer...

Answer 12

Hey Brian, we do not have a thermostat control setup for your roof vent. If that's something you needed you'd have to go with a different vent assembly like the MaxxFan part #MA00-04002K.

view full answer...

Replacement Control Module for Coach Step Model 725-0041

Featured Help Information

Miscellaneous Media

Continue Researching