Replacement Radio for Furrion RV Stereo DV1200
Updated 08/13/2020 | Published 01/17/2019 >
Products Featured in This Question
Question:
Have to replace furrion d1200. Looks like either the jensen jwm60a or awm965 will work. Question is one better than the other.
asked by: Joel
Helpful Expert Reply:
The Jensen RV Stereo part # JWM60A is actually a replacement for the Jensen RV Stereo AWM965 so this is what I recommend using to replace the Furrion RV Stereo DV1200. They both have DVD/CD/USB/Bluetooth/AM/FM capabilities so you won't be losing any features either. The new stereo however is a bit larger so you may need to open the cutout more but this should not be an issue at all.
I have also attached the wiring diagram of each unit so you should be able to swap them out rather easily with just a bit of electrical knowledge. In order to splice the new harness into the RV I recommend using the Deka Heat Shrink Butt Connector part # DW05744-10 (2).
Product Page this Question was Asked From
Jensen RV Stereo w/ DVD Player - Double DIN - App Control, Bluetooth, USB - 48W - 3 Zones - 12V
- RV Stereos
- In-Wall Stereo
- Multimedia System
- 48 Watts
- 12V
- Double DIN
- Bluetooth Compatible
- 9W x 6T x 5-1/2D Inch
- AM/FM
- Antenna Input
- AUX
- CD/DVD Player
- Smartphone App
- USB
- Jensen
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Jensen RV Stereo w/ DVD Player - Double DIN - App Control, Bluetooth, USB - 48W - 3 Zones - 12V
- Q&A: Replacing Furrion DV1200 with Furrion RV Stereo DV1230BL
- Shop: Trailer Hitch
- Article: Where to Position the Trailer Axle?
- Q&A: Recommended Torque Values for Lug Nut on 1/2-Inch Wheel Stud with Steel Wheel
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: marine grease
- Search Results: surge brake actuator brake actuator
- Search Results: furrion rv camera system
- Video: Feature Review Jensen RV Stereo w/ DVD Player
- Q&A: Installation of Idler Hub on etrailer e65GR Trailer Axle
- Q&A: How Does Jensen RV Stereo with DVD Player # JWM60A Mount
- Q&A: Replacement Option For A Jensen JWM60A RV Stereo System
- Shop: TorkLift SuperHitch Hero Trailer Hitch Receiver - Custom Fit - Class IV - Dual 2" Receivers
- Video: Kodiak Disc Brake Caliper Review
- Shop: Kodiak Disc Brake Caliper - Dacromet - 3,500 lbs to 6,000 lbs
- Search Results: e65gr
- Shop: Dometic FanTastic Roof Vent w/ 12V Fan and Thermostat - Manual Lift - 14-1/4" x 14-1/4"
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Shop: LubriMatic Marine Trailer Wheel Bearing Grease - 3 oz. Cartridges - Qty 3
- Video: In-Depth Review of the Jensen RV Stereo w/ DVD Player
- Video: A Closer Look at the Hand Sprayer Installation Kit for Dometic RV Toilets
- Shop: Jensen Mechless RV Stereo - Double DIN - Bluetooth, USB - 36W - 3 Zones - 12V
- Search Results: backup camera
- Search Results: jensen rv stereos
- Search Results: backup camera rv camera system
- Q&A: What Replacement Axle will Work on My Axle with a 5 on 4-1/2 Lug Pattern?
- Video: Checking Out the Kodiak Hydraulic Brake Line Kit
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
- Video: Checking Out the Hydrapro Alpha G-1600 Electric Over Hydraulic Actuator for Disc Brakes



Charles H.
8/4/2020
My old DV1200 has 2 incoming speaker wires, left and right for the "A" zone. The JWM 62A has four. The four speakers in my RV are wired for 2 left and 2 right only. The JWM 62A has wires for right front, right rear, left front and left rear. What is the right way to wire in the JWM 62As 4 outputs into the RVs 2 speaker wires in zone "A"?