Is there a Plug and Play Harness to Install a Brake Controller on a 2019 Chevy Traverse

Question

Question:

Hi, I have a new 2019 Chevy Traverse Premier and need to know which wiring harness to order to install the Prodigy P2 brake controller. My car came with the factory tow package and the manual says there are four blunt cut wires behind the drivers instrument panel I see from an earlier post you think its an actual plug not wires. Could you tell me which harness to order. Thanks

asked by: Mike

1

Helpful Expert Reply:

We know that the 2017 Chevy Traverse with factory 7-Way trailer connector had a plug-in location for a brake controller but nothing is shown for the 2019 Traverse. I would check under the dash, to the left of the steering column, for that wire bundle mentioned in your manual. It is likely held together with a white tag (that is traditionally how GM has handled the wire bundles).

If the wire bundle is present the tag should list the functions of the wires. On a brake controller such as the P2 # 90885 the white wire is ground, black is 12 volt power in, red is input from the brake switch, and blue is output to the trailer brakes. Just splice in the brake controller wires to the tow package wire bundle by function.

expert reply by: Michael H

1

Gerald C.

3/7/2020

I dont have the factory 7 way. I do have. A 7 way plug i installed. I recently bought your harness 3026p. I dont have factory tow pkg. Do i need a different harness to power up my brake controller. This harness does not have the connectors out to 7 way.

Chris R.

3/10/2020

From what I could find, the 2019 Chevy Traverse doesn't have a factory plug for a brake controller - so the # 3026-P harness you mentioned will not work. Your existing brake controller will just need to be hardwired in. The red wire will go to the cold side of the stop light switch behind the brake pedal, the black wire will go to the battery for 12V power, the blue wire will go to the 7-Way's brake output pin, and the white wire is for ground. The Wiring Kit # 5506 will help you with this process.

Helpful Links

Accessories-and-Parts/etrailer/5506.html

Answer 1

The Electric Brake Controller Adapter, part #3026-P, is confirmed to fit the 2018 Chevrolet Traverse Limited. If you have a Limited model you should have the connector underneath your dashboard. Since you don't have the connector under your dash…

view full answer...

Answer 2

The reason you are having trouble finding replacement tires for your Forest River Rockwood Geo Pro G19FD is because the ST235/75-15 tires it has is a very uncommon size that only a few trailer tire manufacturers produce. The closest size we have to…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 6

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 7

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 8

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 9

You're right, the mounting bracket is unique (in a good way) for the Curt TriFlex NEXT Trailer Brake Controller #C24VV. The bracket is smaller and all you do is put the included adhesive tape on the bracket and stick it wherever you like under…

view full answer...

Answer 10

Hey Brandon, I would strongly recommend sticking with the Tekonsha RF brake controller part #TK94FR. We know this works really well and it sounds like it worked well for you too. The Curt Echo is not reliable enough for me to really ever recommend it…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

We can get you everything you need for towing with your 2017 Toyota Sienna XLE. By plastic shield, I believe you are referring to the appearance panel underneath the Sienna, and that will have to trimmed a bit in each of the hitches available for the…

view full answer...

Is there a Plug and Play Harness to Install a Brake Controller on a 2019 Chevy Traverse

Continue Researching