Need a Grease Seal to Replace a Transcom Grease Seal 171255
Updated 10/13/2011 | Published 10/12/2011
Products Featured in This Question
Question:
Need two 171255tc seals but could not find in the catalog.
asked by: Scott
0
Expert Reply:
based on the number you have provided, you have a Transcom grease seal. We have a TruRyde brand that will fit. For a pair, you would need # RG06-050. Or for one double lip seal, # 58846.
To be sure, you can check the measurements of your seal. The measurements will have to be as accurate as possible so I recommend using a set of dial calipers. The inner diameter of the TruRyde seal is 1.719 inches. The outer diameter is 2.565 inches.
expert reply by:
Michael H
0
Product Page this Question was Asked From
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Single Lip
- 1.88 Inch I.D.
- 3.00 Inch O.D.
- Redline
more information >
Continue Researching
- Q&A: Possible Replacement for Trostel 300-156-6 Seal
- Q&A: What is the Four Bolt Brake Mounting Flange for 8,000 Lb Axles
- Q&A: Replacement Seal For National Grease Seal # 5970
- Q&A: Can Grease be Used in Oil Bath Hub
- Q&A: Replacement Trailer Rim With A 4,000 Plus Capacity
- Q&A: Availability of Grease Seal Ring for Seal on 22834 Trailer Hub
- Q&A: Recommended Self-Adjusting Brakes and Hubs for a 2022 Heartland RV Torque TT T281 Toy Hauler?
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Most Popular Wheel Bearings
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Bleed Your Trailer Surge Brakes
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: How Much Does a Boat and Trailer Weigh?