Are Hubs Pre-Assembled on Dexter Axle
Updated 08/28/2018 | Published 08/27/2018
Products Featured in This Question
Question:
Do the hubs come pre-assembled on these axles?
asked by: Rhett L
0
Expert Reply:
The hubs on the Dexter Trailer Axle Beam w/ Idler Hubs # 8327812-I do not come pre-assembled. You will need to put them on yourself. This is a 3,500 lb axle with EZ-Lube spindles with an idler hub that has a 5 on 4-1/2" bolt pattern and uses inner bearing # L68149, outer bearing # L44649 and grease seal # 58846.
expert reply by:
Kyle S
0
Product Page this Question was Asked From
Dexter Trailer Axle Beam w/ Idler Hubs - 4" Drop - E-Z Lube - 5 on 4-1/2 - 89" Long - 3.5K
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Spring Center
- 89 Inch Hub Face
- Drop - 4 Inch
- Dexter
more information >
Continue Researching
- Q&A: Installation of Slipper Spring with Open Eye End
- Q&A: What Type of Breakers Does Powermax Panel PM59VR
- Q&A: Replacement Spindle and Axle Options For a 3,500LB Trailer Axle With Bent 4 Drop Spindle
- Q&A: Replacement Idler Hub w/a 5 on 4-1/2 Bolt Pattern that Has L68149 Inner and Outer Bearings
- Q&A: Can Magnetek 6345 Be Repaired Without Total Power Center Replacement
- Q&A: Do I Need Special Fuses Or Breakers When Installing New PowerMax Power Center Converter In RV?
- Q&A: Are AC Breakers Included With PowerMax PM47VR Power Center W/ Converter For RVs?
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Measure a Trailer Axle
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub