bing tracking image
Q & A Icon

Wiring Connections For Trailer Hitch Wiring on a 2011 Dodge Journey Mainstreet  

Published 09/22/2011

Question:

What wires do I splice the wires from the wiring harness to, on a 2011 Journey? There are several wires with voltage when on and off and the tail brake and side markers are LED, while the turn signal lamp is incandescent.

0

Expert Reply:

I had an opportunity to work with a customer to determine the correct wiring for his 2011 Dodge Journey Mainstreet. Here are the connections we made to get his trailer wiring harness, # C59496, working correctly. You should test each wire on the vehicle, with the included circuit tester, before making the connection to verify that you are connecting to the correct circuit for that wires function.

Wiring Harness Vehicle Wire

White Vehicle Ground
Yellow White/Blue Tracer = Left Turn
Brown White/Slate Gray Tracer = Tail Light
Red Solid White - Brake Lights
Green White/Yellow Tracer = Right Turn
Thick Red Or Black 12 Volt Positive Battery Terminal

Once all of the connections are made, install the fuse in the inline fuse holder, and test the connector with the circuit tester to be sure the harness is working correctly.

The wires with voltages showing when circuits are off will not be noticed by the # C59496 wiring harness. This harness is designed not to respond to voltages lower than 9 volts.

expert reply by:
0
Bob G

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>