Best Vent Location To Prevent Items From Blowing Around While Providing Trailer Ventilation
Updated 06/18/2018 | Published 06/14/2018 >
Question:
Hello. I will be purchasing some vents for my trailer. Which is the best way to face the vents. I do not want everything flying around in the trailer but I need some sort of ventilation as the trailer is unbearable without them.
asked by: Jesus
Helpful Expert Reply:
When installing a product such as the 2-Piece Polypropylene Trailer Vent for 3" # HMAV2-AVT2 inside the trailer, the best way to face vents to prevent items blowing around the trailer depends on the vent location. There are slots on one side of the unit, allowing you to position the vent for best airflow. I recommend installing the vents near the top of the trailer to get the hottest air of the trailer out.
With the vent being installed closer to the roof of the trailer, point the slots of the vent up toward the roof (see pictures). That will ensure you will get the proper ventilation because the air will bounce from the roof and work it way down to the rest of the trailer without blowing items around as much. As long as you use some sealant and you have the slotted holes facing down, you really shouldn't have to worry about moisture or water getting inside the unit. If you install with the vent holes up then rain can get into the trailer.
I have linked all of our enclosed trailer vents for your reference.
Product Page this Question was Asked From
2-Piece Exterior Wall Vent for Enclosed Trailers - Polypropylene - 3" Diameter Hole - Black
- RV Vents and Fans
- Vent
- Wall Vent
- No Fan
- Plastic
- Black
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: enclosed trailer vents
- Shop: 2-Piece Exterior Wall Vent for Enclosed Trailers - Polypropylene - 3" Diameter Hole - White
- Q&A: Side Wall Vent Recommendation for an Enclosed Trailer for Maximum Air Flow
- Video: Replacement Round Interior Trailer Vent for 3" Diameter Hole: The Breakdown
- Video: Breaking Down the 2-Piece Exterior Wall Vent for Enclosed Trailers
- Shop: Trailer Hitch
- Q&A: RV door latch for enclosed cargo trailer
- Video: Review of Rich Solar RV Solar Panels - 400 Watt Charging System Kit - RS97VR
- Video: Rich Solar Charging System Kit Complete Installation - Enclosed Trailer
- Search Results: stabilizer jacks trailer jack
- Search Results: trailer tool box
- Search Results: vent
- Search Results: hitch cargo carrier
- Search Results: front receiver hitch
- Search Results: trailer side vents
- Video: Review of Polar Hardware Trailer Door Latch - Latches - PLR7011S
- Video: Complete Breakdown of the Bauer Products Camper Door Lock
- Video: A Closer Look at the etrailer A-Frame Trailer Tool Box
- Shop: 2-Piece Exterior Wall Vent for Enclosed Trailers - Polypropylene - 3" Diameter Hole - Black
- Shop: RV Exterior Lighting
- Shop: Battery
- Shop: Wheel Step with Non-Slip Surface - 21" long x 9" wide - 300 lb Weight Capacity
- Shop: Loctite RTV 598 High-Performance Silicone Gasket Maker - Black - 2.7-Fl Oz Tube
- Shop: Valterra Deadbolt Lock for RVs - Single Cylinder - Stainless Steel - 1" Throw
- Shop: Exterior Wall Vent for Enclosed Trailers - Aluminum - 12-1/4" x 10-1/2"
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Q&A: Recommended AC System to Replace Two Dometic Duo-Therm AC Units Controlled by the Same Thermostat
- Q&A: Can I Mount the Redarc Tow-Pro Link to a Trailer Instead of Under the Vehicle?
- Q&A: Will the Van Windows Direct Awning Van Bunk Window VW74FR Fit a 2023 Ram ProMaster 3500 EXT?
- Q&A: Replacement Door for a Dometic DMC74FR Water Heater




