Recommended Mounting Kit for Sears X Cargo Roof Box  

The correct mounting hardware for the Sears X-Cargo 20 SV is the part #TH05603. We confirmed this with our contact at Thule who manufactures the Sears boxes.

They do not make any specific replacement parts for the Sears Sport 20-SV anymore however, you can certainly make the Replacement Mounting Hardware part #CTC-18PARTS work for you. The holes may not align perfectly but you can always drill new ones…

Thank you so much for the info and pictures! The correct replacement key for your lock for is part #THKEYN2982 and the correct replacement mounting hardware is part #TH05603. The mounting hardware does look a little different than the original…

We have had this question come up before. To replace the lock on your Sears X-Cargo Sport 20 cargo carrier you can use the Replacement Lock Core and Key #SR03807. This will work if the locks look the same. There is a lock nut on the back of the lock…

For your old Sears X cargo roof box, I recommend the Replacement Hardware Kit for Searsbox Cargo Box #TH05603 which is a confirmed fit for the Sears X-Cargo sport 20 Carrier. This will fit holes 4 inches on center. If you have different measurements…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

There is a retainer bolt in the wheel carrier that holds the bushing and king pin in place in the Demco Kar Kaddy SS #DM9713045. You would need to remove the retainer bolt to release the king pin and replace it. This is a part that we do not…

Since you have a drop axle, you could change it over to a straight spindle axle in order to gain 4 more inches of ground clearance. In order to get a new axle, some measurements of your current axle are needed. You will want to measure hub face to…

There is a hitch receiver fit for your 2022 Honda Pilot, but you will need to visit your local Honda dealer to get a smaller spare tire. The 20" spare tire will cause a fit issue with all of our hitch receivers for your 2022 Honda Pilot. My…

Hi Robert; hopefully your Roadmaster tow bar is one that attaches to direct-connect base plates as opposed to crossbar base plates; for example the 8,000 lb Roadmaster Sterling would be optimal. Assuming that, here is what you need to flat tow your…