Brake Controller and 7-Way Bracket Recommendation for 1997 Ford F-150

Updated 06/11/2018 | Published 06/08/2018

Products Featured in This Question

Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Ford, Lincoln, Mercury

(1798)

$19.06

Mounting Bracket for 7-Way

(530)

$10.94

Question:

Hello, I have 1997 Ford F-150, 2WD, Standard Cab, and 4.2 motor. This vehicle came stock with a 4 pin harness and I added a hitch. I also have a 7 point connector that is not secured to the truck yet until I figure out what I can do. I am looking to add the brake controller for a dual axel trailer as well as a proper mounting kit for the 7 pin. Can you recommend which products would work for a brake kit, 7 pin mounting bracket, and any auxiliary backup lights, etc that I would need? Thank you very much,

asked by: Ryan

Helpful Expert Reply:

Since your 1997 Ford F-150 came with a factory 7-way the correct install harness you'll need to install a brake controller is the part # 3035-P which plugs right in under the dash.

For a brake controller I would recommend the Prodigy P3 Brake Controller part # 90195. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes. This will be the last brake controller you buy. It can easily be transferred to future vehicles as well.

For a 7-way bracket you'd then want the part # 18138 which will allow you to mount your 7-way.

expert reply by: Jameson C