Determining Correct Replacement Hubs for Car Dolly
Updated 06/01/2018 | Published 05/30/2018
Products Featured in This Question
Question:
Need help finding a replacement wheel hub for car dolly
asked by: Miguel M
Expert Reply:
Your Picture helps narrow it down a bit but you still want to check your bearing numbers or measure the inner diameter of both bearings to be sure. You definitely have a 5 on 4-1/2 bolt pattern and it's likely a 3,500 pound axle on your car dolly. If this is the case then you probably have # L68149 for the inner bearing and # L44649 for the outer.
If those are the correct bearings use part # AKIHUB-545-35-K for a replacement hub.
If you can't read the bearing numbers then measure their inner diameters. Bearing # L68149 measures 1.378 inches and bearing # L44649 measures 1.063 inches.
If your bearings are different let me know so I can recommend the correct hub for you.
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.06 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Replacement Hub and Drum and Brake Assemblies for a 1973 Miley Horse Trailer
- Shop: Hydrastar Disc Brake Kit w/ Actuator for Tandem Axle Trailers - 13" Hub/Rotor - 8 on 6-1/2 - 7K
- Video: An In-Depth Look at the Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K - 7K Axles - 12" - 8 on 6.5 - Pre-Greased
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-3/4
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs
- Video: Feature Breakdown: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle
- Video: Feature Breakdown: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles
- Video: Timken Bearing Kit Installation - Enclosed Trailer
- Search Results: bearing kit
- Shop: RV Plug Adapters
- Video: Review of the Camco Power Grip RV Power Cord Adapter w/ Handle
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Video: Comprehensive Review: Bearing Packer
- Video: Feature Breakdown: Seal Puller
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What Is The Smallest Available Spindle Nut For 2.5k Axle?
- Article: Hydraulic Trailer Brakes: How They Work & What to Buy
- Article: Trailer Wiring Diagrams
- Q&A: How to Determine Replacement Trailer Wheel Bearing Sizes
- Q&A: Replacement Grease Seals For TRP GS-1719DL
- Q&A: Does Ventline E-Z Lift Ventadome Trailer Roof Vent # V3092-603-00 Have Ceiling Garnish
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: How to Tell the Weight Rating of a Trailer Axle
on Trailer Bearings Races Seals Caps
