Replacement Trim Rings for Under-Bed Rail and Installation Kit on 2015 GMC Denali

Question

Question:

Replacement Trim Ring I installed this kit about 3 years ago, and love it. How can I get 4 replacement Trim Rings?

asked by: Kevin B

0

Expert Reply:

Thank you for the photo and we do have replacement trim rings for the Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel Trailer Hitches # RP30868 in your 2015 GMC Denali. For those you need the Replacement Trim Rings for Reese Elite Series 5th Wheel Rail Kit # RP58458.

expert reply by: Kyle S

0

click to enlarge

Answer 1

For a gooseneck ball to fit the factory rail kit of your 2014 Ford F-350 you'd want the Reese Elite kit part #RP30137 which would fit right into the pucks of your truck. We have the replacement puck trim kit part #RP58458 which will give you the…

view full answer...

Answer 2

Thanks for reaching out and providing your photo! To replace the trim rings for the OEM puck system on your 2020 Ford F-250 you'll want the Kit #RP58458 and then to cover up the gooseneck hole we have the part #RP30136. Unfortunately a trim ring…

view full answer...

Answer 3

The Replacement Trim Rings for the Ford OEM prep package are part #RP58458. The Gooseneck hole does not have a trim ring but there is a gooseneck hole cover part #RP30136.

view full answer...

Answer 4

I believe what you need for your 2021 Ford F-250 Super Duty is the Replacement Puck Plug Covers for Elite and Signature Series Fifth Wheel Rails #58199 which I know you mentioned you do not need, however even though the trim ring is circular and it…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Replacement Trim Rings for Under-Bed Rail and Installation Kit on 2015 GMC Denali

Continue Researching