5th Wheel Installation Kit Recommendation for a RBW 15K 5th Wheel Hitch

Question

Question:

i have a rbw hitch looking for the installation kit for it. i think its a 15k. from what i can see the model number seems to be lr1000. 2005 ford f150 6 1/2 ft bed.

asked by: Doug

0

Expert Reply:

You have two options for installing the RBW Lil Rocker in your 2007 Ford F-150 pickup. You can use the Universal Fifth Wheel Trailer Hitch Installation Kit with Rails, item # RP30035, or the Fifth Wheel Trailer Hitch Custom Installation Brackets - Ford F-150, item # RP50081-58 that you referenced.

I would recommend you use the Custom Brackets # RP50081-58, these will install in about half the time of the universal rails and will minimize the drilling into your 2007 Ford F-150.

I have included installation instructions for both products below for you to check out.

expert reply by: Jameson C

0

Answer 1

The Lil Rocker fifth wheel hitch you have is designed to fit the same industry standard fifth wheel rails as the current hitches made so we have several hitches that would work. The Reese Hitch part #RP30047 would be a great option. It has a 16k…

view full answer...

Answer 2

To install your Li'l Rocker hitch, you'll need an installation kit for your truck that includes the base rails that install inside your truck bed as well as the brackets that install beneath it. I recommend the Reese Universal Base Rails and…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hey Larry! Yes, the Onan Generator - QG 7000i Onboard RV Generator #CM44MR is capable of using a remote start. For a standard setup, you can use a switch like #CM86RR along with an extension harness #CM26RR. You can also use the EC-AGS+ Auto…

view full answer...

Answer 10

Hey Lauris! Is the Brinkley prepped for a generator or are you saying it has room for one? If it doesn't have some kind of generator prep you're going to need a lot of parts from Cummins to install #CM44MR. You will have to add a fuel tank,…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

5th Wheel Installation Kit Recommendation for a RBW 15K 5th Wheel Hitch

Continue Researching