Can Wireless Remote be Added to Lippert 3.0 Ground Control Leveling System

Updated 06/03/2024 | Published 04/19/2018

Question:

I have a Grand Design Reflection Fifth Wheel with the Lippert 3.0 Ground Control Leveling System and would like to add a remote if possible. How can I determine if it will support? If it will not what can I add or change so that it will support it?

asked by: Jay F

Expert Reply:

All of the Lippert 3.0 Ground Control Leveling Systems can use the wireless remote that will allow you to operate the system. Your 3.0 system should have included the remote, but it's possible your dealer or previous owner forgot to give it to you.

To use a remote with your Lippert 3.0 Ground Control System, you will just need the Replacement Wireless Touchscreen Remote # LC358601. Once you receive the remote, you will simply follow the steps listed out below to program it to your system.

1. Enter the Leveler app on the LINC Remote.
2. Turn the remote on by pressing and releasing the large silver button at the bottom of the unit.
3. Press the “OK” button on the touch screen to access the Function Menu.
4. Press the Leveler App button.
5. With the interface turned off, press LEFT 5 times and then RIGHT 5 times.
6. The LCD on the interface should read “Wireless Configuration”.
7. Click any button on the LINC remote in the Leveler App.
8. The LCD on the interface should read “Successful!” Your wireless Level-Up system is now ready to use

expert reply by: Chris R

Jeff

6/3/2024

I too purchased new a 2020 Grand Design Solitude 2930RL and there was no remote for Lippert 3.0 Ground Control Leveling System. You're certain all I would need is a replacement remote? How do you know wireless is supported from Grand Design and was installed?