Disc Brake Kit Recommendation for 8,000 lb Rated Lippert Axles
Updated 04/20/2018 | Published 04/18/2018
Products Featured in This Question
Question:
I have a newer fifth wheel with three #8,000 Lippert axles. Id like to replace the drum brakes with a disc brake system. The kits I found on the site look like they are for lighter duty and/or fewer axles. Can someone point me in the direction of kits you carry that would apply? Thank you.
asked by: Joe
0
Expert Reply:
We have the Kodiak disc brake kit part # K2HR89DD which is a kit confirmed as a fit for 8,000 lb Lippert axles like what you have. You'll need the bearings separately as # 25580 and # 02475 and then for a grease seal # RG06-070.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 13" Hub/Rotor - 8 on 6-1/2 - Dacromet - 8,000-lb Dexter
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 8000 lbs
- Brake Assembly
- 8 on 6-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Disc Brake Conversion Kit For A Lippert 8 Lug 8K Axle
- Q&A: Is The Bulldog Trailer Jack # BD178201 Available
- Q&A: Diode Recommendation to Prevent Trailer Battery From Backfeeding onto Vehicle Wiring
- Q&A: Recommended Conversion Kit for Disc Brakes On 7,000 Lb Dexter Axles
- Q&A: How to Bleed Electric Over Hydraulic Trailer Brakes
- Q&A: Recommended Disc Brake Pads for a Dexter 89-3 Caliper
- Q&A: Is It Normal For Trailer Tires To Increase In PSI While Towing
- Article: Hydraulic Trailer Brakes: How They Work & What to Buy
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Winterize & De-Winterize Your RV (Simple Guide)
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision