Availability of the Andersen Aluminum Ultimate 5th Wheel Connection 2 AM3220

Question

Question:

Am3200 is for use with rails. I plan on using gooseneck which am3220 is listed as fitting. Unless i misunderstood Andersen's website. Plan was AM3220 with BW turnover ball.. my truck doesn't have the factory puck system.

asked by: Nathan

0

Expert Reply:

The only Anderson hitch we carry is the Andersen Ultimate Connection 5th Wheel Trailer Hitch System with Adapter part # AM3200. We do not offer the Andersen Aluminum Ultimate 5th Wheel Connection 2 part AM3220 which is just the aluminum version of the above hitch that is 20 lbs lighter. The aluminum version also has a higher weight capacity (+4,000 lbs).

expert reply by: Conner L

0

Nathan

4/18/2018

Am3200 is for use with rails. I plan on using gooseneck which am3220 is listed as fitting. Unless i misunderstood Andersen's website. Plan was AM3220 with BW turnover ball.. my truck doesn't have the factory puck system.

Conner L.

4/18/2018

You are correct, the Andersen Ultimate Connection 5th Wheel Trailer Hitch System with Adapter part # AM3200 is designed to be used with above bed industry standard base rails whereas the Andersen Aluminum Ultimate 5th Wheel Connection 2 part AM3220 is designed to be used with most standard gooseneck hitches. In order to use the Andersen Aluminum Ultimate in the bed of your 2015 Ford F-250 with a B&W Turnoverball Underbed Gooseneck Trailer Hitch you would need to use part # BWGNRK1111. If your truck has dual rear wheels then you will also benefit from adding an extended latch pin like part # BWGNXA1800. You can add an in-bed wiring harness like part # 50-97-410 for easy wiring connections. I have attached an install video of the B&W hitch for you as well.

Answer 1

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 4

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 5

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 6

Hey Tom, congrats on the new truck! Typically when we hear that someone has the OEM tow prep package they mean the puck system. This is going to be five circular holes built into the bed of your Ram truck and is by far the best way to attach a 5th…

view full answer...

Answer 7

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 8

Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…

view full answer...

Answer 9

Since we don't carry the PullRite line I can't really speak to their quality but from what I can see from there website their 2900 model is fairly similar to the Demco Autoslide 5th Wheel Hitch w/ Slider #DM89GV. Both hitches offer 14"…

view full answer...

Answer 10

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 11

Hey Paul! The PullRite SuperGlide #PUL43RR (2714) and #PUL73RR (2914) do weigh the same. The main difference is the capacity, which is going to come from the base of the 5th wheel hitch. Since your 2027 Keystone Cougar 316RLS has a GVWR of 12,900 lbs…

view full answer...

Answer 12

Hey Jeff! The MORryde GooseTech 5th Wheel to Gooseneck Pin Box #MR97MV comes with a Demco eZ-Latch. The best option for a lock is the InfiniteRule Lock for Cast Demco eZ-Latch Trailer Couplers #IR66FR. This is designed to for a standard coupler but…

view full answer...

Availability of the Andersen Aluminum Ultimate 5th Wheel Connection 2 AM3220

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching