Replacement Swivel Collar Recommendation for Roadmaster Sterling Tow Bar

Question

Question:

Need replacement swivel collars for a Sterling roadmaster tow bar. The MDL: RM-9200-6 looks correct but want to make sure. It states for Roadmaster Tow bars.... Please advise.

asked by: Adam M

0

Expert Reply:

The correct Roadmaster Sterling swivel collars are the part # RM-910661. The set you referenced would not fit what you have.

expert reply by: Jameson C

0

Answer 1

The Complete Repair Kit for Roadmaster Sterling Tow Bar #RM-910003-30 contains (4) Rubber caps (2) Locking springs (2) Retaining rings (2) Shoulder bolts (2) Nylock nuts (14) 1-1/2" Diameter acetyl washers (1) 3/4" Jam nut (4) 3/4"…

view full answer...

Answer 2

What you would need is the part #RM910003-32 for the bolts, the part #RM-200029-10 for the bushing and then for the yoke part #RM910575 and you'd be set. There isn't an entire kit that covers all the parts you need but with these three part…

view full answer...

Answer 3

The Universal Jam Nut for Roadmaster Towbars #RM350264-10 you referenced is indeed a genuine Roadmaster tow bar jam nut and does come with red Loctite already on the threads (pictured below).

view full answer...

Answer 4

Hey John, The Roadmaster Base Plate Adapter #RM-025 is going to have a 28-1/2" measurement on center between the mounting holes where it attaches to the vehicle base plate. And the on center measurement on 31". What are you towing the Mini…

view full answer...

Answer 5

In order to flat tow your 2000 Honda CR-V, you will need to first add base plates. You can use the XL style base plates that you have referenced, #1528-3. In order to use your Reese tow bar, #63180, you will need to use an adapter, #RM-025, and quick…

view full answer...

Answer 6

Does you 1997 Geo Tracker have a Blue Ox Base Plate kit #BX3508 for a 2-door or part #BX3505 for a 4-door installed on it? If so, then to use a Roadmaster Sterling Tow Bar #RM-576 you will need to also use the #RM-031-5 that you referenced. Since the…

view full answer...

Answer 7

The Roadmaster Crossbar-Style Base Plate Kit - Fixed Arms Item #118-1 is a confirmed fitting base plate for your 1994 Geo Tracker and to attach it to your Reese tow bar you'll need the Roadmaster Tow Bar Adapter #RM-025. To flat tow you'll…

view full answer...

Answer 8

It sound like you need a base plate kit for your 1994 Geo Tracker in order to attach a tow bar for flat towing. If that is the case then the RoadMaster Base Plate to Blue Ox and Demco Tow Bars Adapter part #RM-033 will not work in this manner as it…

view full answer...

Answer 9

The Roadmaster StowMaster Tow Bar #RM-501 is compatible with the Roadmaster Crossbar-Style Base Plate Kit #118-15 so you shouldn't need any other components aside from some safety chains, like part #RM-643. If your StowMaster doesn't have the…

view full answer...

Answer 10

In order to attach the Tow Ready Tow Bar, #63180, to your Roadmaster base plates, you will need the Roadmaster Base Plate to Tow Ready Tow Bar Adapter, #RM-025. This will allow the two different parts to work together. The Roadmaster Quick Disconnect…

view full answer...

Answer 11

There are a few things you will need along with a tow bar to pull your 1987 Suzuki Samurai. First you will need a base plate kit, the Roadmaster Standard Base Plate Kit, part #1003-1, will fit your 1987 Suzuki Samurai if you do not have a brushguard.…

view full answer...

Answer 12

Before you begin purchasing the necessary equipment needed to flat-tow your 1986 Suzuki Samurai, you will want to review the "recreational towing" section of your owner's manual for any certain stipulations when flat towing your…

view full answer...

Replacement Swivel Collar Recommendation for Roadmaster Sterling Tow Bar

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching