Replacement Bearings Kit for Wells Cargo Tote Wagon

Updated 03/20/2018 | Published 03/19/2018

Products Featured in This Question

Replacement Trailer Wheel Bearing - L68149 - Qty 1

(2219)

$20.41

Replacement Spindle Washer - Tang Type for E-Z Lube

(778)

$5.60

Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle

(3090)

$19.41

Replacement Trailer Wheel Bearing - L44649 - Qty 1

(2219)

$24.81

Question:

I need to replace bearings, races, seals on a Wells Cargo Tote Wagon. There is not a hole through the spindle for a cotter key, so I need your advise on what kit to purchase. The spindle is 1 3/8inch at the base tapering to 1 1/16 inch at the threaded end. The spindle is the type with the grease fitting built in to the threaded end. Thanks for any help you can provide.

asked by: Lee W

Expert Reply:

E-Z Lube spindles that have the grease zerk fitting on the end like yours don't use a cotter pin because it would interfere with the grease running through the spindle. Instead they use a tang washer, like part # 5-101, which you should have.

From your measurements it sounds like you have a popular # 84 spindle which uses bearings # L68149 and # L44649 for the inner and outer respectively. Verify with the bearings you have and if they're correct the kit you need is part # BK2-100 which includes the bearings, races, grease seal, the tang washer and the cotter pin that you won't need.

expert reply by: Charles S