Replacement Trailer Hub Recommendation for Bearing Race Numbers L44610 Inner/Outer
Updated 03/15/2018 | Published 03/14/2018
Products Featured in This Question
Question:
Need to know if you carry spindle wear sleeve for my bearing buddy spindle? The old one got torn up.Spindle measures 1.68without the sleeve.Planning to purchase Dexter 84546UC3 hub/drum assembly bearings match the old UFP HD 1377 10 assemble. Will this match up with idler hub? idler axle s spindle is straight and takes L44610 bearings in and out.5 x 41/2 14 inch tires Also need to know if I should look at uni servo or duo servo brake assembly. I have an Atwood actuator with lockout lever.
asked by: Roger P
Expert Reply:
Sounds like you have an EZ lube spindle like the part # TRU74FR. We don't carry any type of sleeve for this type of spindle. Are you talking about a washer for the castle nut possibly?
The part # L44610 is actually a race for # L44649 bearing and since you said you have two of them that would indicate you have a 3,500 lb axle hub. The part # 84546UC3 is a 3,500 lb hub like you'd need then.
The uni-servo assemblies part # 23-313 and # 23-312 would work well with this.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Replacement Hub & Drum For UFP HD-1377-10 & Hydraulic Brakes For Boat Trailer
- Q&A: Replacement for UFP HD1377 Trailer Hub/Drum
- Q&A: What is the Difference Between the Dexter 010-036-00 and the Timken TMK98ZR Grease Seals?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Difference Between Dexter and etrailer Hub/Drum Assembly for 3,500 lb Axles
- Q&A: What Size Wet Bolts Come with MORryde Suspension Upgrade Kit # MR46ZR
- Q&A: Torque Specs for 3500-lb 5-on-4-1/2 Dexter Hub/Drum 84546UC3
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: How to Tell the Weight Rating of a Trailer Axle