Dimensions of Junction Box of Epicord 7-Way Molded Trailer Plug with Junction Box 277-000141

Question

Question:

what is the dimensions of this box?

asked by: Tony

0

Expert Reply:

The width of the junction box of the # 277-000141 is 3-1/4 inches, the height is 2-1/4 inches and the length is 7 inches.

expert reply by: Jameson C

0

click to enlarge

Answer 1

For your 2022 Ford E-450 cutaway chassis the correct Tekonsha brake controller install harness is actually the part #22292. This is why what you have doesn't look like it would work with the 3035-P.

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

Hey Donny! For your Dometic Penguin/Brisk Air 15,000 BTU AC model B59516.711C0-MX, the correct soft start is the #DMC93JF. This is designed for Dometic Brisk II electronic air conditioner units with in-wall thermostats.

view full answer...

Answer 6

Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…

view full answer...

Answer 7

With a 2022 F350 short bed, hitting the top of the bed rails should not be an issue with most campers. Turning clearance however, will certainly be a factor. That is one advantage of the Andersen Ultimate hitch #AM3200, as it provides a 9"…

view full answer...

Answer 8

Hey Clarendon, you're on the right track. You’re not wrong in how you’re thinking about this. You’re coming off a Flex Air, which is about as good as it gets for ride quality, especially paired with a B&W Companion. That rotating head plus…

view full answer...

Answer 9

No, I am sorry it does not. I just spoke with Lippert and none of the Curt Helux Shock-Absorbing 5th Wheel Pin Box like item #C73RJ are compatible with gooseneck adapters like the Anderson Ultimate 5th Wheel Hitch. You would need to use a standard…

view full answer...

Answer 10

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Dimensions of Junction Box of Epicord 7-Way Molded Trailer Plug with Junction Box 277-000141

Continue Researching