Are Taillights STL8RGB and STL9RGB a Set? What Butt Connectors and Shrink Wrap do I Need?
Updated 09/08/2025 | Published 06/05/2025
Products Featured in This Question
Question:
Hi Are taillights STL8RGB and STL9RGB a set of the same manufacturers lights? One is driver side and other is passenger side... Do they come with butt/ heat shrink connectors? If no, what PN works in this application? Is it a good idea to place another piece of heat shrink over these for more water protection on my jet ski trailer. PN =?
asked by: Dave
Expert Reply:
Hello Dave,
Yes, the Combination LED Trailer Tail Light - Submersible - 6 Function - 11 Diodes - Passenger Side # STL8RGB is the better half to the Combination LED Trailer Tail Light - Submersible - 7 Function - 14 Diodes - Driver Side # STL9RGB.
The lights use 20 gauge wire, so you will need a pack of the Deka Heat Shrink Butt Connector - 22-18 Gauge - Nylon Insulation - Red - Qty 5 # DW05743-5. When I rewired my boat trailer I went ahead and put Primary Wire Heat-Shrinkable Tubing - 14-10 Gauge - Black - 3/16" Diameter - 6" - Qty 25 # DW05449 over the butt connectors as well. It gives me peace of mind having the extra layer on marine applications.
If you do not have a heat gun, the Trades Pro Dual Range Heat Gun w/ Nozzles - 5-Piece # ALL836717 works great!
Do you have a specific lake you like to go out on? I fish some local Bass tournaments here in Missouri out on the Lake of the Ozarks and Mark Twain Lake.
(click to enlarge)
Product Page this Question was Asked From
Combination LED Trailer Tail Light - Submersible - 7 Function - 14 Diodes - Driver Side
- Trailer Lights
- Tail Lights
- Rear Reflector
- Side Marker
- Side Reflector
- Stop
- Tail
- Turn
- Square
- Pedestal Mount
- Submersible Lights
- LED Light
- 5L x 4-1/2W Inch
- Red
- Optronics
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Difference Between Kenda Karrier K03 and KR35 Trailer Tires
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Q&A: Will Optronics Fleet LED Trailer Tail Lights Fit 7" Long x 2-1/2" Tall Cutout
- Q&A: LED Replacement Trailer Taillights for Peterson 440-15R
- Q&A: Connecting the Brown Wire for Running Lights
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: How Wide of a Rim is Recommended for the Tire Size ST225/75R15
- Q&A: Cross Referencing 10-9 Replacement Grease Seals for Aliner Trailer
- Q&A: Is There A 205/75R15 LR D Tire With A Black Mod Wheel With A 5 on 5" Bolt Pattern Available
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
- Article: Converting Your RV Water Heater to Tankless
- Article: Trailer Lighting Requirements
- Article: Basics of Tie Down Straps
- Article: Printable Trailer Bolt Hole Pattern Template
Kate F.
9/8/2025
Hey Dave, Did you have a chance to try out the heat shrink tubing and connectors on your jet ski trailer? I'm curious if the extra layer of protection gave you the peace of mind you were looking for. Your experience could really help others considering similar upgrades!