Longer Weight Distribution Shank Recommendation for Increasing Distance To Allow Tailgate to Open
Published 02/22/2018
Question:
Thanks so much for the recommendation on a longer shank. Forgot to ask you about longer safety chains. With the current 12” shank, I’m using two 26” chains plus Clevis Slip Hooks and quick link connectors (overall length length 33”). What chain lengths do you recommend when going from a 12” to an 18” long shank? I assume something around 42”.
asked by: William K
Expert Reply:
We have the Curt Weight Distribution Shank # C17122 which is much longer than most standard shanks. It 14" from the center of the pin hole to the center of the adjustment holes which is typically quite a bit longer than most shanks and would most likely be what you would need in terms of additional length.
Product Page this Question was Asked From
Curt Weight Distribution Shank - 14" Long - 7" or 7-1/2" Drop - 1,500 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1400 lbs TW
- Fits 2 Inch Hitch
- Round - 7 Inch Drop
- Trunnion - 5 Inch Drop
- Round - 10 Inch Rise
- Trunnion - 11 Inch Rise
- CURT
more information >
Continue Researching
- Q&A: Will Using a Longer Weight Distribution Shank Reduce Rear End Sag on the Tow Vehicle
- Q&A: Replacement Hubs, and Brake Assemblies for a Dexter 6,000 lbs Axle
- Q&A: How to Upgrade 12K Equal-i-zer to 14K Eqaul-i-zer
- Q&A: Can The Blue Ox Rota-Flex Lockout Kit Be used With An Andersen 5th Wheel Hitch
- Q&A: Can Blue Ox Gooseneck-to-5th-Wheel Trailer Hitch Adapter Fit with Rota-Flex Pin Box
- Q&A: Dimensions of the Rota-Flex 5th Wheel Pin Box # 328330
- Article: The Best 5th Wheel Hitches
- Q&A: What Trailer Lift Kits Will Work with the MORryde CRE3000 Equalizers
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Replace a Rubber RV Roof
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
William K.
2/22/2018
Thanks so much for the recommendation on a longer shank. Forgot to ask you about longer safety chains. With the current 12” shank, I’m using two 26” chains plus Clevis Slip Hooks and quick link connectors (overall length length 33”). What chain lengths do you recommend when going from a 12” to an 18” long shank? I assume something around 42”.