Bolt Pattern and Recommended Wheel and Tire for Salt Water Boat Trailer with ST175/80r13 Tires
Published 02/26/2018 >
Products Featured in This Question
Question:
I re-measured the lugs and my original 4.25” was wrong and your 4.5” is right. So what do you guys have for an economy minded customer (aka cheap bastard) for galvy wheels with 5 lug at 4.5” spacing to have a good ST175/80-13 tire. It’ll go to a trailer hauling a 30 year old Tracker boat so it doesn’t need to be all that pretty. Heck, previous take offs would do. I’m not that vain. Thanks.
asked by: Robert V
Expert Reply:
It would be odd for the 4-1/4 inch measurement to be accurate. I've attached an article on measuring bolt pattern for you to confirm your bolt pattern before ordering. If you do end up with the same measurements, you may want to consider changing out your hubs as that isn't a standard size.
Based on your wheel size, I believe you will have a 5 on 4-1/2 inch bolt pattern and recommend the Provider ST175/80R13 Radial Tire w/ 13" White Spoke Wheel - LR C Finish # TA43RR. This tire is rated for weights up to 1,360 lbs at 50 psi. It is also rated for speeds up to 81 mph.
The Karrier ST175/80R13 Radial Trailer Tire with 13" Galvanized Wheel # AM31994 has a load range of D and are also a good option but may have too firm a sidewall for your lighter weight boat.
Product Page this Question was Asked From
Karrier ST175/80R13 Radial Trailer Tire with 13" Galvanized Wheel - 5 on 4-1/2 - Load Range D
- Trailer Tires and Wheels
- Tire with Wheel
- Radial Tire
- Load Range D
- 175/80-13
- 13 Inch
- M - 81 mph
- 5 on 4-1/2 Inch
- Steel Wheels - Galvanized
- Kenda
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: st185 80r13
- Search Results: trailer tires and wheels
- Shop: Karrier ST175/80R13 Radial Trailer Tire with 13" Galvanized Wheel - 5 on 4-1/2 - Load Range D
- Shop: Kenda Karrier KR35 ST185/80R13 LRC Radial Trailer Tire w/ 13" Black AM09 Wheel - 5 on 4-1/2
- Search Results: spare tire mount for trailer
- Shop: Kenda Karrier KR53 ST175/80R13 Radial Trailer Tire with 13" Silver Mod Wheel - 5 on 4-1/2
- Shop: Karrier ST175/80R13 Radial Trailer Tire with 13" White Wheel - 5 on 4-1/2 - Load Range D
- Q&A: What is the Difference Between ST175/80D13 and ST185/80D13 Tires and Load Range C and D
- Search Results: trailer wheel chocks
- Video: Ultra-Fab Products Wheel Chocks - Wheel Chock - UF21-001095 Review
- Q&A: Will The CE Smith Spare Tire Mount CE27201 Work With A 6-Lug Wheel?
- Q&A: Recommended Wide Stance X Chocks for a Tandem Axle Trailer
- Shop: Tie Down High-Mount Spare Tire Mount - 4, 5, and 6 Lug Wheels - Galvanized Steel
- Search Results: 3 ball mount
- Search Results: 3 ball hitch
- Search Results: boat trailer spare tire mount
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Kenda Karrier ST175/80R13 Radial Trailer Tire with 13" Black Mod Wheel - 5 on 4-1/2 - LR D
- Shop: Kenda Karrier KR53 ST175/80R13 Radial Trailer Tire with 13" Galvanized Spoke Wheel - 5 on 4-1/2
- Q&A: Comparing Radial Vs Bias Ply Tires
- Q&A: Replacement Tire and Wheel Recommendation for 185/80-13 Tires on a Dual Axle Boat Trailer
- Q&A: What Torque Is Required To Install 13 Inch Aluminum Wheel Tire Combinations
- Q&A: What Torque Should Trailer Wheel 13 inch be Torqued to
- Article: Trailer Tire Sizing
- Video: Karrier ST175/80R13 Radial Trailer Tire with 13" Galvanized Wheel: The Breakdown
- Article: Most Popular Wheel Bearings
- Video: Measuring To Choose The Right Trailer Axle
- Video: Checking Out the Counteract Tire Balancing Beads Single Pack for Trailers
- Video: Comprehensive Review: Grease Seal
- Video: Detailed Breakdown of the Karrier ST175/80R13 Radial Trailer Tire with 13" White Wheel



Robert
2/26/2018
I re-measured the lugs and my original 4.25” was wrong and your 4.5” is right. So what do you guys have for an economy minded customer (aka cheap bastard) for galvy wheels with 5 lug at 4.5” spacing to have a good ST175/80-13 tire. It’ll go to a trailer hauling a 30 year old Tracker boat so it doesn’t need to be all that pretty. Heck, previous take offs would do. I’m not that vain. Thanks.