Trailer Hitch Recommendation for 1989 Ford F-250

Updated 02/09/2018 | Published 02/08/2018

Products Featured in This Question

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(35)

$34.83

Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"

(265)

$250.93

Adapter 4-Pole to 7-Pole and 4-Pole

(660)

$61.90

Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional

(2763)

$124.90

Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires

(3401)

$101.73

Question:

i need a trailer hitch for my 1989 f250 also wiring for towing trailer etc.

asked by: Sam

Expert Reply:

For your 1989 Ford F-250 the Curt hitch part # 14001 is a confirmed fit and would work well for towing a trailer.

You will need to start with a 4-way (if you do not have one). For that you would want the # C55316.

Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way.

If you do have trailer brakes you would need the # ETBC7 instead of the # 37185 and a brake controller. This kit comes with everything needed to wire up the 7-way and install a brake controller.

For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup.