What is the Difference Between Reese 30051 and Reese 5th Wheel Trailer Hitch RP30075

Question

Question:

what is the differance between 30075 and 30051

asked by: Frank S

0

Expert Reply:

Both of these hitch have almost the same exact features with the one outlier being that the # RP30051 uses a square tube design while the # RP30075 uses a round tube design. The round tube design will offer a smoother transition when sliding in the maneuvering position.

With the year, make, and model of your truck, I would be happy to recommend an installation kit for a 5th wheel trailer hitch.

expert reply by: Michael H

0

Answer 1

Hi Kari; the Reese Quick-Install Custom Outboard Brackets for 5th Wheel Trailer Hitches #RP55VR are the same as the Reese 56019. Are you looking for a specific Reese part?

view full answer...

Answer 2

The Reese 5th Wheel Hitch #RP30051 is considered a compatible fit your your 2013 Dodge Ram 1500 with a 6 foot bed. To install this 5th wheel square slider hitch you will need the installation kit composed of #RP30035-386. The sliding operation of…

view full answer...

Answer 3

Round tube sliders are preferred as they operate smoother and easier. The square tube sliders will get the job done but the round ones will just work a bit easier. The Reese 5th Wheel Trailer Hitch w/ Round Tube Slider #RP30075 will a great option…

view full answer...

Answer 4

Reese and many other brands of 5th wheel hitches (including Curt, Valley, Draw-Tite Reese and others) are mutually compatible with each others base rails. The Reese16K Square Tube Slider 5th Wheel Hitch, part #RP30051, will fit your existing Curt…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 12

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

What is the Difference Between Reese 30051 and Reese 5th Wheel Trailer Hitch RP30075

Featured Help Information

Miscellaneous Media

Continue Researching