Dimensions and Weight of CargoGlide 2200HD Heavy-Duty Sliding Tray for Trucks CG2200HD-9548

Question

Question:

What is the width of this tray?

asked by: Gene H

0

Expert Reply:

The CargoGlide 2200HD Heavy-Duty Sliding Tray for Trucks # CG2200HD-9548 has OUTSIDE dimensions 95-inches long x 49-1/4-inches wide. The INSIDE deck surface is 94 x 48 inches. The total deck height is 5-1/4-inches. Actual weight of the unit is 295-lbs.

This unit has a 2200-lb weight-carrying capacity and it provides up to 65% extension of the tray. It comes fully assembled. Installation instructions are linked for your review.

expert reply by: Adam R

0

Answer 1

The 60 inch long Rail Kit for Kwikee SuperSlide II RV Storage Slide Out Tray Assembly #LC370787 is a one-way slide.

view full answer...

Answer 2

The Rail Kit for Kwikee SuperSlide II RV Storage Slide Out Tray Assembly - 60" Long - 800 lbs #LC370787 rails are 60" long and provide 42.42" of travel, so part of the cargo tray stays supported by the brackets.

view full answer...

Answer 3

You can go with a listed 29" model of the MORryde RV Cargo Sliding Tray as its actual width is 28-3/4". Please note the attached image showing dimensions of width. We have the #MR69FR that is 90" in length by 29" wide and has a 2…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 7

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 8

Hello Travis, Thanks for writing in! Your father-in-law's Demco Autoslide 5th Wheel Trailer Hitch for Dodge Ram - Single Jaw - Above Bed - 18,000 lbs #DM59XV is built to mount to industry-standard above-bed rails, so it won't drop right into…

view full answer...

Answer 9

Hey Don, thanks for reaching out! The correct fit for your 2024 Ford F-250 with the Tremor package is the Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR. I confirmed with my contact at Hellwig that this will fit specifically with your Tremor…

view full answer...

Answer 10

Hey Michael, this is a great question but the difference between the TST TPMS part #TST44VR and the part #TST-507-RV-4-C is just the display. The part #TST-507-RV-4-C is a display with buttons along the side of it it to make changes whereas the part…

view full answer...

Answer 11

Hey Alan! The best upgraded equalizer is the one that matches the measurements on your current equalizer. This keeps your suspension geometry the same. The Lippert Road Armor Shock-Absorbing Equalizer Kit #LC53CK you were looking at is a good option…

view full answer...

Answer 12

The B&W Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches - 10 Bolt #BWRVR3200 will fit your 2018 Ford F-250 with aluminum bed but B&W doesn't recommend it. You will want to use some sort of spacers/isolators that…

view full answer...

Dimensions and Weight of CargoGlide 2200HD Heavy-Duty Sliding Tray for Trucks CG2200HD-9548

Continue Researching