Replacement Recommendation For Improving Suspension For 14,000-lb Trailer
Updated 12/12/2017 | Published 12/09/2017
Products Featured in This Question
Question:
I have a 14000 pound trailer with dexter axles the length of spring hangers is 9 inches. Need to know what cushioned equalizer I need.
asked by: Blaine B
Expert Reply:
From the information and picture you sent, it looks like you have slipper springs for your trailer. Your picture seems to show a tandem trailer with a "Stright Equalizer" and the dimensions you sent are similar to such an equalizer in our available inventory, Item # TREQ4541. Unfortunately, I do not have cushioned equalizers that will work in your situation. However, I do recommend the Timbren Silent Ride Suspension for Tandem Trailers, Item # TSR14KT01.
The Timbren Silent Ride Suspension replaces all of your springs suspension but not your axles. It distributes the weight evenly between your axles and has rubber springs that absorb road shock so that you have a smoother and quieter ride. Item # TSR14KT01 has a heavy duty construction that requires very little maintenance and has a weight capacity of 14,000 lbs.
Additional information and videos attached.
Product Page this Question was Asked From
Timbren Silent Ride Suspension for Tandem Axle Trailers w/ 3" Round Axles - 14,000 lbs
- Trailer Suspension Parts
- Leaf Spring Replacement System
- Camper
- Car Hauler
- Utility Trailer
- 14000 lbs
- Round Axle - 3 Inch
- Tandem Axle
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Video: Installation of the TruRyde Equalizer for 2" Wide Slipper Springs
- Video: The Low-Down on the Equalizer for 2" Wide Slipper Springs
- Q&A: Which Wet Bolt to Use with the Slipper Spring Equalizer TRFA71063
- Shop: Timbren Silent Ride Suspension for Tandem Axle Trailers w/ 3" Round Axles - 14,000 lbs
- Shop: Equalizer for 2" Wide Slipper Springs - 12" Long - 7/8" Center Hole
- Shop: Wet Equalizer Bolt with Castle Nut and Grease Zerk - 4-11/16" Long - 7/8" Diameter
- Shop: Equalizer Bolt with Cotter Pin and Castle Nut - 7/8" Diameter
- Q&A: What Is The Difference Between Center Hangers TRHG291-C and 29-1?
- Q&A: Replacement Suspension Kit Recommendation for a 2021 Lamar Trailer with Tandem 7K Axles
- Shop: Equalizer for 2" Wide Slipper Springs - 12" Long - 7/8" Center Hole - Zinc Plated
- Shop: Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Q&A: Roadmaster Comfort Ride Leaf Spring Suspension Kit for CrossRoads Elevation TF3612
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Can I Determine the psi Rating of a Wheel
- Q&A: Can MORryde X-Factor and Roadmaster Comfort Ride Systems be Installed Together?
- Q&A: What is Needed to Install 8k Roadmaster Comfort Ride System on 7k 3 inch Axles
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Where to Position the Trailer Axle?
- Article: Trailer Lighting Requirements
- Article: How to Raise Your Travel Trailer Height
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)