What Material are the Ultra-Fab Stackable Stabilizers # UF48-979004 Made of

Question

Question:

What kind of material are the jacks made of

asked by: Richard

0

Expert Reply:

The Ultra-Fab Stackable Stabilizers # UF48-979004 that you referenced are made of die-cast aluminum that is strong, sturdy, and rustproof. They have a weight capacity of 6,000 lbs each.

expert reply by: Jon G

0

Answer 1

For a black spare tire cover for your trailer tire size of 5.30-12 the Adco Spare Tire Cover part #290-1740 would be a really great option that is the correct size. The Adco covers like this have a great 3 year warranty, are made from a high quality…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 4

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 5

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 6

Hey Morgan, the best hitch for what you are looking for would be the Draw Tite part #DT73RR which has the easiest install and the highest tongue weight rating. The hitch does fit right up under the rear bumper which will slightly reduce ground…

view full answer...

Answer 7

Hey Nick congrats on the new car! The bottom portion of the receiver for the Curt item #C69VV sits 11-3/4" above the ground when installed on your 2025 Subaru Outback Premium. If you're worried about ground clearance, I recommend installing…

view full answer...

Answer 8

Hi Jessey! We have everything you need for your 2024 Subaru Outback. To start, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C67JR. This is a little bit of work to get installed, but it is going to be the best…

view full answer...

Answer 9

Hey Poches, happy to help! The torque spec for the Draw-Tite Max-Frame Hitch #DT73RR is 50 lb-ft for all the bolts that the hitch comes with. You can also find this listed in step 8 of the installation instructions if you want to double-check while…

view full answer...

Answer 10

Hey Lawrence thanks for the information! I wasn't able to find any good pictures of the inside of your Axle Tecknology BD2-655 drums. What you'll need to do is pull one of the hubs off and look at the inside. If they're smooth like the…

view full answer...

Answer 11

Hey Andy, the bolts that come with the Demco Spare Tire Mount for up to 4" Trailer Tongue #DM15851-52 that you referenced are right at 4 inches long 3/8 inch diameter and are a fine thread. Did you lose yours?

view full answer...

Answer 12

Hey Tom, great question! Both products provide an easy way to measure tongue weight, but they excel in different situations. The BTBRV Trailer Jack Foot Scale #BTBRV014 measures tongue weight at the trailer jack, so you don't need to position a…

view full answer...

What Material are the Ultra-Fab Stackable Stabilizers # UF48-979004 Made of

Product Page this Question was Asked From

Continue Researching