Replacement Wheel Studs for Trailer Hub part # 8-173-16UC3
Updated 11/03/2017 | Published 11/02/2017
Products Featured in This Question
Question:
I have the wheel hub 8-173-16UC3. I need to replace a couple of studs in the hub. Do you know what size studs part number I need to get? Thank you,
asked by: Christopher K
0
Expert Reply:
The trailer hub part # 8-173-16UC3 uses 1/2 inch diameter 2 inch long wheel studs like the part # RG03-060.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 2,200-lb Axles - 7" Diameter - 4 on 4
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- L44649 / L44649
- Standard Grade
- For 2200 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: What is the Best Surge Brake Actuator to Replace My Old Atwood Brake Actuator AT82543?
- Q&A: Hubs and Brakes for 2k Axle
- Q&A: Is the Dometic 310 Toilet the Same as the Powermax 310 Toilet?
- Q&A: Does Brake Output Wire on USCAR Harness Need To Be Hooked Up To Use Redarc Tow-Pro Link?
- Q&A: Can Trailer Brakes be Added to Time Out Motorcycle Trailer
- Q&A: Can 4.80-12 Size Trailer Tires Be Changed to 4.80-8 Size
- Q&A: Recommended Sealant for Roof on Pop-Up Camper
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Curt Echo Full Review
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: How to Tell the Weight Rating of a Trailer Axle