Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
No need for extra mounting or a trip to the shop. The Kenda Karrier KR53 ST205/75R15 radial tire comes pre-mounted on a 15" white mod steel wheel and arrives already aired up. You can bolt it on and get moving right away, saving time and effort while knowing it’s set up correctly from the start.
This Load Range C tire is built for dependable everyday towing. It handles up to 1,820 lbs at 50 psi, giving you the strength to haul gear and equipment with ease. The paired steel wheel is rated at 2,200 lbs, so the whole setup is balanced for solid load support that holds up trip after trip.
Long drives or hot pavement aren’t an issue with the KR53’s radial design. It reduces heat buildup, promotes even tread wear, and keeps your trailer tracking steady behind you. The low-weight tread helps improve fuel efficiency while maintaining stable, predictable handling at highway speeds—rated up to 87 mph (speed rating N).
Built to handle weather and road grime, the white mod steel wheel resists rust for a clean look that stays sharp over time. Its powder-coated finish with red and blue pinstripes adds durability and style while sealing out moisture for lasting performance in wet or humid conditions.
This combo uses a 5 on 5 bolt pattern and a 0 offset for easy matching with larger hub setups. Rim dimensions are 15" diameter x 5" wide, pilot diameter is 3.31", and wheel bolt size is 1/2"-20. With specs clearly defined, you know exactly what to expect before installation.
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody, Andy here with etrailer.com. Let's take a real quick look at this Kenda Karrier KR53 ST205 75R15 radial trailer tire on this 15-inch white mod steel wheel. Now, this radial trailer tire obviously comes pre-mounted on this 15-inch white mod steel wheel with a five on five inch bolt pattern. So whether you're replacing a worn out setup or you're prepping a new trailer, you're gonna save time and skip the hassle of separate mounting and inflation. The low-weight design of this KR53 tire is gonna help improve fuel economy on longer trips and the highway-friendly tread's gonna keep your trailer tracking steady and straight. So this is gonna be ideal for both short hauls and cross-country travel.
This is a radial trailer tire, so that radial construction's gonna help reduce heat buildup and promote longer tread life, especially on extended trips. So as I mentioned at the beginning of our time together, and as we have stamped here on our tire, this is an ST205 75R15. This is a load range C tire, meaning it has a 6-ply rating. The maximum load capacity is 1,820 pounds at 50 PSI. And this has a speed rating of N, indicating a maximum speed of 87 miles per hour.
This included white steel mod wheel does feature blue and red pins strips that go around the circumference of the wheel. And it has a rust-resistant finish that's built to handle those tough conditions trip after trip. And the dimensions of our wheel, checking with the diameter first. Measuring beat seat to beat seat, it's 15 inches. The width of the wheel is five inches.
And again, our bolt pattern is five on five inches. And in case you don't know, the first number in the bolt pattern is the number of bolt holes and the second number is the diameter in inches of the circle on which the bolt holes sit. So to determine the bolt circle diameter on wheels with an odd number of bolt holes as we have here, you simply measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. Our wheel stud size is 1/2 an inch by 20. The capacity of our wheel is 2,200 pounds.
And this does not include a center cap, but if you decide to pick one up, you just wanna make sure that it fits a pilot diameter of 3.31 inches. Now, if you do pick this assembly up, we would love to hear back from you regarding your experience with installing this and using this, so you can share your experience with us by dropping a comment or leaving a review on this product page. And if you happen to have any other additional questions, don't hesitate to reach back out to us. We do wanna be sure that you're getting exactly what you want and need. Well, I think that's gonna wrap up our quick look today. I do hope that it was helpful for you. Again, my name is Andy. Thanks for joining me.
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Heather A.
9/30/2026
Wow the wheels look great Fred! What kind of trailer is this on?