Weight Distribution Shank for 2-1/2 Trailer Hitch Receivers
Updated 11/02/2017 | Published 11/01/2017
Products Featured in This Question
Question:
Hi... I have a 2014 Ram with the 2.5inch receiver. Does anyone make a 2.5 weight distribution hitch so that I dont have to use the reducer sleeve?
asked by: Gary S
Expert Reply:
Most of our weight distribution systems do not come with a 2-1/2" shank. Some do but your options are limited at that point. The best solution I have for you would be to choose the weight distribution system you want without a shank, and use a 2-1/2" shank which is sold separately to allow you to use the system on your 2014 Ram 3500. The shank does not have to be the same brand as the weight distribution system you are using it on. The only thing you will need to know in order to choose the right shank would be the correct amount of rise/drop.
For a 2-1/2" weight distribution shank with a 3" drop and 7" rise you will want part # EQ90-02-4700. For a 2-1/2" weight distribution shank with a 4" drop and 8" rise you will want part # EQ90-02-4800 or part # EQ90-02-4900 for a 2-1/2" weight distribution shank with a 6" drop and 10" rise.
In order to choose the correct weight distribution system to go with this shank, you will first need to determine your towing setups total tongue weight. Your total tongue weight can be calculated by adding the loaded ready to tow tongue weight of your trailer by any cargo storage behind the rear axle of your Ram. An easy way to find this would be to use a tongue weight scale like the Sherline Trailer Tongue Weight Scale part # e99044.
.
I have attached a list of weight distribution systems that will work for you once you determine your total tongue weight. I have linked our Equal-i-zer selection as they seem to be the most popular and well-reviewed systems. I have also attached a review video on one of the shanks for you as well.
Product Page this Question was Asked From
Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 7" Rise, 3" Drop
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 700 lbs TW
- 800 lbs TW
- 900 lbs TW
- 1000 lbs TW
- 1200 lbs TW
- 1300 lbs TW
- Fits 2-1/2 Inch Hitch
- Equal-i-zer
- Square - 3 Inch Drop
- Square - 7 Inch Rise
- Equal-i-zer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 10" Rise/6" Drop
- Shop: Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 8" Rise, 4" Drop
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Replacement 2-1/2 Inch Shank for Fastway e2 Weight Distribution System
- Shop: Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 7" Rise, 3" Drop
- Video: Set up: Equal-i-zer Weight Dist Shank on a 2013 Ford F-250 and F-350 Super Duty
- Search Results: equalizer
- Shop: Curt Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-3/16" Span
- Q&A: Dimensions Of Equal-i-zer Weight Distribution Shanks For 2-1/2 Inch Receivers
- Shop: Equal-i-zer Weight Dist Shank - 12" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Shop: Suspension Enhancement
- Video: Equal-i-zer Weight Dist Shank: The Breakdown
- Video: All You Need to Know About the Equal-i-zer Weight Dist Shank
- Shop: etrailer Hitch Receiver Lock for 2" and 2-1/2" Hitches - Flush - 3-5/8" Span - Chrome
- Q&A: Recommended Sway Control/Weight Distribution for Trailer With 1500-2000 lb Tongue Weight
- Q&A: Weight Distribution Shank for 2018 Ram 2500 that Can Provide 3 inches of Drop
- Q&A: Equal-i-zer Weight Distribution for 1,000 lb Tongue Weight and 2-1/2 inch Hitch
- Shop: Equal-i-zer Weight Distribution Shank - 12" Long - 7" Rise, 3" Drop - 400 lbs TW
- Video: All About the SumoSprings Solo Custom Helper Springs
- Search Results: hitch pins and clips
- Search Results: torque wrench automotive tools
- Search Results: torque wrench
- Search Results: fastway e2 shank
- Search Results: fastway weight distribution hitch
- Q&A: Hitch Pin Lock Recommendation for 2-1/2 inch Hitch
- Q&A: Equal-i-zer Hitch Shank that Can be Used in 2-1/2 inch Hitch
- Search Results: 2 1/2" shank