Replacement Shank for Equal-I-zer Weight Distribution System for More Height Drop

Updated 10/31/2017 | Published 10/30/2017

Products Featured in This Question

Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 10,000 lbs GTW, 1,000 lbs TW

(864)

$679.86

Curt Weight Distribution Shank - 12" Long - 15-3/4" or 16-1/4" Drop - 1,500 lbs TW

(47)

$170.72

Equal-i-zer Wt Distribution Shank - 12" - 13" Rise, 9" Drop - 600 to 1,400 lbs TW

(510)

$207.60

Question:

How do I figure out how much of a drop I need from my motor home to my cargo trailer, right now I dont have any but my equalizer bars are to tight causing the holds on the trailer to bend and break?

asked by: Brian W

Expert Reply:

When using a weight distribution system like the Equal-I-zer # EQ37100ET between a taller motor home and a trailer you may need a shank with more drop than usual. For instance the replacement shank # EQ90-02-4400 provides for up to 9-inches of drop and it works for systems rated for up to 1400-lbs of trailer tongue weight.

Shanks are standardized and interchangeable between brands so if you need even more drop we offer parts like Curt # C17125 that provides over 15-inches of drop with a trunnion bar head.

You can refer to the linked article for help in determining which shank will work best for you.

Be sure to set-up your WD system according to the manufacturer instructions to ensure correct and safe operation.

expert reply by: Adam R