bing tracking image
Memorial Day Deals Are Here!
SAVE NOW
Customer Service My Orders
Q & A Icon

How Does Prodigy P3 Brake Controller Install on 2013 Chevy Silverado  

Published 10/27/2017

Question:

I need the wiring kit to use a Tekonsha P3 on a 2013 Chevrolet Silverado. Which one do I use? Thanks

1

Helpful Expert Reply:

For your 2013 Chevy Silverado all you need is the Prodigy P3 part # 90195 and you'd be set to install the controller in your 2013 Chevy Silverado because no plug is present under the dash, but the needed wires are already run. You will connect the brake controller wiring with the vehicle wiring already present under the dash.

I attached an install video that shows this controller installed on a similar 2013 Chevy Silverado.

expert reply by:
1
Jameson C

Video/Article/FAQ this Question was Asked From

Article or Video
Q & A Icon

Continue Researching

See More Q&A Expert Answers >>
Explore Expert Info Our Expert
on Trailer Brake Controller

Videos

Help Articles

Expert Answers

Others Also Watched
A Closer Look at the 30 amp. In-Line Circuit Breaker
In-Line Circuit Breaker Feature Review
Tekonsha Custom Wiring Adapter for Trailer Brake Controllers Spec Review
Blaylock EZ Lock Trailer Coupler Lock Review
Review of Blaylock Industries Trailer Coupler Locks - Surround Lock - BLTL-33-40D
An In-Depth Look at the etrailer Hitch Receiver and Coupler Lock Set
Demco Channel Tongue Trailer Coupler Feature Review
Feature Breakdown: InfiniteRule Lock for Demco eZ-Latch Trailer Couplers
Blaylock EZ Lock Trailer Coupler Lock for 2" Lipped Couplers Review
Blaylock EZ Lock Trailer Coupler Lock Review BLTL-20
Others Also Read
Aftermarket Brake Control Wiring for 07-13 GM Full-Size Truck with Factory-Integrated Brake Control
Brake Controller Installation: Starting from Scratch
How to Measure for Trailer Hitch Drop
Towing a Trailer? Let's Talk About Brake Controllers
Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
Determining Trailer Tongue Weight
Brake Controller 7- and 4-Way Installation Kit (ETBC7)
Our Team Picked The Best Camping Gear of the Year - Here Are Their Top Choices
5 Things to Know About Weight Distribution Hitches
Others Also Asked
Replacing Factory Integrated Brake Controller in 2013 Chevy Silverado With Aftermarket Controller

The factory-installed integrated brake controller in your 2013 Chevrolet Silverado uses an OEM connector that is not compatible with aftermarket brake controllers from Tekonsha and others. But since there is wiring in place under the dash to allow…

view full answer...
Setting Tekonsha P3 Brake Controller to Electric Over Hydraulic Mode

To work with your electric over hydraulic actuator, you would set your Tekonsha P3 to electric over hydraulic mode, by pressing the menu/options button. Then, on the SETUP screen, scroll down to brake type and press OK when Hydraulic is highlighted.…

view full answer...
How Does Brake Controller Install in Tiffin Phaeton 40AH

We've spoken with Tiffin in the past about where to find the brake controller install wiring for your Phaeton 40AH and they told us that under your driver side dash there are 4 wires that have butt connectors on them. They are labeled by…

view full answer...
Recommended Trailer Wiring and Brake Controller for a 1999 Dodge Ram 2500

Hey Cory, thanks for reaching out! I'd be more than happy to help you get your 1999 Dodge Ram 2500 set up for trailer towing! Here are the parts you'll need: - T-One Vehicle Wiring Harness #118329 - Universal Wiring Upgrade #ETBC7 - Mount…

view full answer...
Can Redarc Tow Pro Liberty Brake Controller Install 2012 Toyota Sienna LE

Hey Chandler, brake controllers like the Redarc Tow Pro Liberty part #RED52VR can basically be installed on any vehicle so you can definitely install it in your 2012 Toyota Sienna. Redarc probably left your vehicle off since it's a little older…

view full answer...
What is the Difference Between a 4-Way and 7-Way Trailer Connector

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...
How To Tell Apart 5,200 lb, 6,000 lb and 7,000 Axles

As you may have already found, 5200 lb, 6000 lb and 7000 lb axles can all use the same components including inner/outer bearings, hubs and brakes. Here are some other things they share in common: Dexter 5200 lb Regular Duty Axle - 0.180 inch tube…

view full answer...
How To Turn Off The Tekonsha Prodigy P3 Brake Controller #90195

The Tekonsha Prodigy P3 Brake Controller, #90195, does not have an on and off switch. It will go into sleep mode after several minutes of no activity. The power draw when it is in the sleep mode is so negligible that it will not discharge the…

view full answer...
Will TST TPMS Sensors Work With the 770 Touch Screen Monitor

Junic, I did some research it looks like the 770 monitor will work with all other TPMS's as long as they have a date code of 4519 (45th week of 2019) or newer. If your sensors are older, then you'd need to use the 507 display; #TST-507-D-C.

view full answer...