Bearing Outside to Bearing Outside Measurement on Trailer Hub Assembly for 2K Axles T4084600042
Updated 09/20/2017 | Published 09/19/2017
Question:
For part # T4084600042 what is the distance from inner bearing surface to outer bearing surface? Curious if it will fit my trailer spindle. All the diameters already check out.
asked by: Mike
0
Expert Reply:
Since the races (that go around the bearings) are already pressed in on Trailer Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Cast Item # T4084600042 I can measure from the outside of one to the outside of the other. That measurement is a hair less than 3-3/4 inches.
expert reply by:
Michael H
0
Product Page this Question was Asked From
Dexter Trailer Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Cast Iron
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L44643 / L44643
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Recommended Idler Hub Kit w/a 5 on 4-1/2" Lug Nut Pattern for 2,200 lbs Axles
- Q&A: Bearings For Older Trailer Hub 22834
- Q&A: Correct Bearing Kit for a 2001 Karavan Single Axle Jetski Trailer
- Q&A: Mounting a Marker Light at a 45 Degree Angle at the Back of a Trailer
- Q&A: Recommended 5 Lug Hub for a Spindle w/ 141125 Inner and 09067 Outer Bearings
- Q&A: What Tire Size Replaces an Old A78-13 Tire Size
- Q&A: Where to Measure on Trailer Spindles to Determine Replacement Hubs
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Bleed Your Trailer Surge Brakes
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Most Popular Wheel Bearings
- Article: Trailer Lighting Requirements
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub