Determining Correct Replacement Bearing
Updated 09/19/2017 | Published 09/18/2017
Question:
I have a 1994 boat trailer and want to replace bearings, etc. The numbers on the bearings are: l44848 . I dont see a reference for that PN. I discussed this with Pat and we ordered Bearing Kit, L44649 Inner/Outer Bearings, 10-60 Seal. Im hoping this will work. The more I read the more concerned I get. I asked to talk to maintenance guys but she didnt want to bother them apparently. Will this work as Im wanting to verify before shipment! Thanks
asked by: Art D
Expert Reply:
Since your bearing L44848 is not a typical bearing number the best way to know what replacement bearing will work is to use a digital caliper and measure the inner and outer diameters of your bearings and grease seal. You can measure the inner parts by measuring the B, C, and D locations of your spindle in the attached picture. You will then just need to measure the corresponding locations on your hub for the outer diameter measurement.
Once you find those measurements you can either filter through the linked page of bearings or you can let me know what you find, and I can find a replacement for you.
Product Page this Question was Asked From
Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Standard Bearings
- Bearing L44649
- Race L44610
- 1000 lbs Axle
- 2000 lbs Axle
- 2200 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Review of Lippert Trailer Bearings Races Seals Caps - Bearing Kit - LC23ZP
- Search Results: l44649
- Search Results: 1/2 lug nuts
- Search Results: cotter pin
- Search Results: 10~9 seal
- Shop: Taskmaster 5.30R12 Radial Trailer Tire w/ 12" Vesper White Spoke Wheel - 4 on 4 - LR C
- Shop: Lippert Complete Bearing Kit for 2,200-lb Trailer Axles - L44649 Bearings, L44610 Races
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Q&A: Replacement Bearing and Idler Hub Options For a 2006 Snowbear Utility Trailer With 2,000LB Axle
- Q&A: Correct Hub to Fit Spindle with Near BTR Spindle Dimensions
- Shop: B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
- Shop: Complete Bearing Kit with L44649 Inner/Outer Bearings and 10-9 Grease Seal Fits 1.063" Spindles
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Search Results: trailer cap
- Search Results: axle cap
- Shop: B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
- Search Results: 16060
- Video: All You Need to Know About the Grease Cap, 1.99" OD EZ Lube Drive in with Plug
- Video: The Low-Down on the Grease Cap, 1.99" OD EZ Lube Drive in with Plug
- Q&A: Trailer Brake Assembly Recommendation for Dexter Hub/Drums # 8-257
- Video: Review of the Dexter Electric Trailer Brakes
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Article: How to Measure for Trailer Hitch Drop
- Shop: Suspension Enhancement
on Trailer Bearings Races Seals Caps
