What is the Elevation Limit for Camco Olympian Wave 6 Catalytic Safety Heater CAM57341

Question

Question:

What elevation will the heater work at

asked by: Jeff B

0

Expert Reply:

I checked with Camco and Olympian Wave 6 Catalytic Safety Heater for Mid-Sized RVs Item # CAM57341 is safe for use at elevations up to 12,000 feet.

expert reply by: Michael H

0

Answer 1

What you need is the Camco Propane Adapter #CAM59213. This allows you to adapter a hose like part #CAM57703 that you'd use for the Wave 6 #CAM57341 to connect to a 1-lb (throwaway) bottle of propane. Attached is a quick demonstration video that…

view full answer...

Answer 2

If you currently have idler hubs on your Timbren suspension you will need to change them to hub/drums in order to install brakes on the trailer. You also need to have brake flanges on the Timbrens to allow installation of electric drum brake…

view full answer...

Answer 3

On trailer brake magnets like what's on the brake assembly #23-106 the magnets are not polarity sensitive which means either wire can be used as the power or ground as long as the other is the opposite. This is why the wires of the assemblies are…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 7

Hey Mike, if you wanted to use the Wireless Tow Bar Light Bar part #LIW-LDTL-7B as a flat tow lighting kit for your Bronco as it's being flat towed behind your motorhome it would work exactly like you would want it. The turn signals of it would…

view full answer...

Answer 8

Your Weatherpro awning is made by Dometic, but the Solera fabrics that we offer would still be compatible. Based on the code I believe you have a 21' awning. I would doublecheck this by measuring from the center of one arm to the center of the…

view full answer...

Answer 9

Assuming your 8K Bulldog jack is a side wind with a 1/2 inch diameter shaft then yes, you could use replacement knob #BD500248 with your jack. It was designed as a replacement for 139, 159, 170 and 190 series jacks. Check the sticker on your jack to…

view full answer...

What is the Elevation Limit for Camco Olympian Wave 6 Catalytic Safety Heater CAM57341

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching