Compatible Bearing Buddy to Fit Axle Hubs with Reliable Oil Caps Installed
Updated 09/01/2017 | Published 08/31/2017
Products Featured in This Question
Question:
I have a EzLoader 2100 lbs boat trailer, Model 5-EZWB14-182100. It has been equipped with Reliable oil filled caps. One broke off and I would like to replace with Buddy Bearing Protectors. Two questions: 1. How do I remove the broken plastic that remains on the hub? 2. What model of Buddy Bearing should I order from you? I would like stainless.
asked by: Phil C
Helpful Expert Reply:
When trying to remove the broken Reliable oil cap you may need to use a hammer and a long flat head screwdriver. Placing the screwdriver head on the outer edge of the cap, lightly tap the screwdriver to force cap to turn in the desired direction to remove from the hub. Be careful not to put the screwdriver inside hub to try to remove the cap. It could slip and damage the threads on the inside of the hub.
To make sure you will receive the correct Bearing Buddy for your trailer's hubs, a measurement of the ID of the hub opening will be needed.
Typically with the Reliable caps, the hub bore is 2.08 inches. If this is the case, then the Bearing Buddy Bearing Protectors - Model 2080T-SS - Threaded - Stainless Steel (Pair), # BB2080T-SS, will be the set you will need for your trailer.
Before installing Bearing Buddy, clean and pack you wheel bearings. I recommend using the LubriMatic Marine Trailer Wheel Bearing Grease, # L54FR.
If you feel that you may need to replace your bearing, then supply use with the bearing and seal numbers and we will be able to find a new set for you to install on your axle.
I have attached an article that will explain how to remove, pack, and install wheel bearings and seals for you to review.
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.99 Inch
- 2000 lbs Axle
- 2500 lbs Axle
- 3500 lbs Axle
- Bearing Buddy
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Bearing Buddy Bearing Protectors - Model 2080T-SS - Threaded - Stainless Steel (Pair)
- Q&A: How To Convert from Oil Baths to Grease with 2-1/6 Inch Hub Bore
- Q&A: Does Bearing Buddy Threaded Bearing Protectors # BB2080T-SS Fit Reliable Oil Bath Hubs
- Shop: Bearing Buddy Bearing Protectors - Model 2080 - Chrome Plated (Pair)
- Q&A: How to Convert Oil Bath Trailer Hubs to Grease Hubs
- Video: An In-Depth Look at the Bearing Buddy Bearing Protectors
- Q&A: Bearing Buddy Recommendation to Replace Grease Cap that is 2.080 inches
- Shop: Replacement Grease Zerk for Ram Jacks
- Shop: LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
- Shop: Bearing Buddy Bearing Protectors - Model 2441T-SS - Threaded - Stainless Steel (Pair)
- Q&A: Availability of Bearing Buddy that Can Fit Threaded Hub Bore
- Q&A: How to Choose Correct Bearing Buddy for Vortex Threaded Hub
- Q&A: Bearing Buddy Recommendation for Threaded Hub Bore
- Search Results: bearing buddies
- Search Results: trailer hubs and drums
- Shop: Bearing Buddy Bearing Protectors - Model 1980T-SS - Threaded - Stainless Steel (Pair)