Replacement L-Pins for Curt TruTrack Weight Distribution System # C17501

Updated 08/09/2017 | Published 08/08/2017

Products Featured in This Question

Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 15,000 lbs GTW, 1,500 lbs TW

(640)

$634.95

Replacement L-Pins and Clips for Curt TruTrack Weight Distribution System w/ Sway Control - Qty 2

(222)

$20.44

Sway Bracket Jackets for Equal-i-zer Weight Distribution Systems - Qty 2

(309)

$32.63

Replacement L-Pins and Clips for Equal-i-zer Weight Distribution Systems - 6K to 14k - Qty 2

(354)

$22.72

Question:

Will the Snap L Pin from Equal-i-zer fit this Curt TruTrack system? And will the Sway Bracket Jacket fit the TruTrack brackets? I assume those could be trimmed if not, is this correct? Thanks,

asked by: Joseph T

Expert Reply:

The Replacement L-Pins and Clips for Equal-i-zer Weight Distribution Systems # EQ95-01-9430 that you referenced are confirmed to fit Equal-i-zer and Fastway Weight Distribution (WD) systems but not the Curt TruTrack Weight Distribution System # C17501. For the TruTrack you will want to use the direct replacement L-Pins which can be found as part # C17513 on our site.

Since the Sway Bracket Jackets for Equal-i-zer Weight Distribution Systems # EQ95-01-5150 are meant to fit the Equal-i-zer L-Pins and have not been tested with the Curt L-Pins I cannot for sure say if they are compatible or not. I'm sure you could modify the bracket jackets, but then they might not perform as they were meant to.

expert reply by: Jon G