Replacement Brake Shoes for 10x2-1/4 Inch Hydraulic Brakes

Question

Question:

I need 10 x 2.25 brake shoes for my boat trailer. I can not find any part numbers. are all shoes the same?

asked by: Tony

0

Expert Reply:

If you have hydraulic brake assemblies that are not free-backing hydraulic trailer brakes, then the 10" X 2-1/4" Hydraulic Brake Shoe/Lining (One Wheel), # BP04-120, are the shoes that you will need. One set of shoes will replace one brake assembly.

If you have free-backing hydraulic brakes then use one of the following per wheel:

Replacement Brake Shoes for Titan 10" Free-Backing Hydraulic Trailer Brakes, # T4744800.

Replacement Brake Shoe Lining for Demco/Dico 10" Free-Backing Hydraulic Brakes, # BP04-126.

10" x 2-1/4" Hydraulic Brake Shoe/Lining (One Wheel) - Dexter Free-Backing, # BP04-123.

expert reply by: Jared P

0

Answer 1

We do indeed, the #BP10-060 brake adjuster for 10 or 12 inch hydraulic brake assemblies fits Dexter, Demco and Dico 10" Hydraulic trailer brake assemblies, so it would work great for you. If you also need a new adjuster spring, use #046-083-01

view full answer...

Answer 2

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 3

We have the perfect replacement for your Titan/Dico Model 60 actuator for drum brakes. These actuators are designed to fit 3" channels and are multi-fit actuators, meaning they fit 1-7/8", 2", or 50-mm balls. We offer the same Titan…

view full answer...

Answer 4

Like you said, many factory integrated brake controllers will not work well with electric over hydraulic trailer braking systems. Some of the newer versions of these controllers now have an electric over hydraulic mode. Check to see if any of your…

view full answer...

Answer 5

You may want to check the adjustment on your trailer brakes. You should hear a slight but constant drag of the pads on the drum when the drum turns. But excessive noise could indicate that the brakes are adjusted too aggressively or there could be…

view full answer...

Answer 6

Yes, you can replace a weld-on surge brake actuator with a bolt-on surge brake actuator and you can weld a bolt-on surge brake actuator to the trailer. If you are handy with a welder and have one available then I prefer this method over the other as…

view full answer...

Answer 7

We do carry reaplcement brake shoes for the Titan 10" free backing brakes with part #T4744800 and part #T4742700 for uni-servo 10" Titan hydraulic brakes (standard brakes). We do not carry them as a kit for all 4 wheels however, it may be…

view full answer...

Answer 8

Yes, the Demco Hydraulic Brake Actuator #DM72VR will be a good replacement for your older actuator DA-66. This actuator has a bolt-on installation and requires 2-1/2 inch x 4-1/2 inch grade-5 bolts which are not included. The actuator works with drum…

view full answer...

Answer 9

We have just what you would need. For idler hubs you would first need to start with the part #8-214-5UC1 (if you don't have these already) and then to install a disc brake kit specifically for these hubs you would need the part #K2R1058D11 for…

view full answer...

Answer 10

Red grease is considered to be the most heavy duty and waterproof grease out there so we recommend it highly for boat trailers. My honest recommendation would be to continue using the red grease like with part #L11390 but if you wanted to remove all…

view full answer...

Answer 11

I have a solution but this is not surprising with that style of coupler. There is no good way to lock it. Thinking a different direction though you could use the etrailer Trailer Wheel Lock part #288-02020 this will give you the perfect solution for…

view full answer...

Answer 12

Yes, you can use marine wheel bearing grease in both your boat and utility trailer. It will not hurt anything at all to use marine wheel bearing grease in your utility trailer. The only real difference between the two greases is that the marine wheel…

view full answer...

Replacement Brake Shoes for 10x2-1/4 Inch Hydraulic Brakes

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching