Do Trailer Wheel Studs have Weight Capacities
Updated 07/18/2017 | Published 07/17/2017
Question:
6 lug wheel with 5500-6000lbs boat trailer hub replace with RG03-080 . Its good? Im. Ordered the rg03-080
asked by: Song K
1
Helpful Expert Reply:
If the wheel stud part # RG03-080 is the correct dimensions for your hub then it's going to work well. These don't have a specific weight capacities but if they are the correct size and are going to be used on a trailer these will work.
expert reply by:
Jameson C
1
Product Page this Question was Asked From
Replacement Trailer Hub Wheel Stud, Drive-In, 1/2" x 2-3/4" - Qty 4
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 1/2 Inch Diameter
- Drive-In Stud
- 2-3/4 Inch Long
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Length of Catch Arm on UWS Lock Cylinder UWSLOCKCH501 and Can Lock Be Keyed Alike
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Replacement Trailer Wheel Studs With 1/2 inch Diameter
- Q&A: Wheel Stud Recommendation to Fit Dexter 7,000 lb Hubs
- Q&A: How To Determine the Correct Size Lug Nuts For a Trailer
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: How To Determine the Weight Capacity For a Trailer Axle
- Article: Trailer Tire Sizing
- Q&A: Can I Take the Inner Tube of the Ram Gooseneck # GCSQTW-30008 and Put it in My Outer Tube on Trailer
- Article: Which Hitches are Made in the USA
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: Rust Prevention