Replacement Mounting Hardware for a 1-1/4 Inch Yakima HoldUp Bike Rack  

The good news is the Replacement 2" Hitch Shank for Yakima HoldUp Bike Racks #8880580 is the confirmed correct part from Yakima to convert your HoldUp to a 2" shank. According to Yakima, you're also going to need the Replacement Hitch…

The Yakima Replacement Hitch Bolt and Clip for Yakima HoldUp Hitch Mounted Bike Carrier, part #Y8890200, is a 5/8 inch bolt. The size wrench you would use to install or remove this bolt is 15/16 inch.

For your Yakima OnRamp Bike Rack #Y96FR that has the 1-1/4" hitch tube you will need the Replacement Tongue Assembly #Y99TR. This will replace your hitch tube and give you a 2" hitch tube for mounting your bike rack. The Replacement Tongue…

I spoke with my contact at Yakima and he stated that the Replacement Hitch Bolt and Clip, #Y8890200, is compatible with your older Yakima HookUp bike rack.

Comparing Yakima Hitch Pins for 1-1/4 inch receivers #Y8880129 and #Y8890176, they looked identical to me, so I contacted Yakima and they are in fact identical parts. They just give different numbers to them for some reason, but the diameter, pitch,…

I have exactly what you are looking for. I went ahead and called my tech at Yakima, and she confirmed that the replacement mounting bolt that connects the Plus 2 Add On #Y02446 to the HoldUp is the Replacement Mounting Hardware for Yakima HoldUp Plus…

Replacement Threaded hitch pin #Y8880129 is indeed longer than the original bolt. It is 4.28 inches long overall. Something that you should know though is that when using a hitch adapter like you mentioned it reduces the tongue weight capacity of the…

Yes, Yakima Replacement Hitch Bolt #Y8880129 is the correct item to secure the HoldUp Hitch Bike Rack #Y02445 in your 1-1/4-inch Class II hitch.

In order to convert your Yakima HoldUp #Y02445 to be compatible with a 2 inch hitch, you would only need the Replacement Tongue for Yakima HoldUp Bike Racks #8880580, which is a 2 inch tongue.

For your Yakima Hold Up, the Replacement Spine #8890277 will require the Replacement Hitch Hardware for Yakima HoldUp Bike Racks #8890260. The 1-1/4 inch hardware will not be the correct fit for the larger shank.

There is definitely a way to lock your Yakima bike rack to your hitch. The Yakima HitchLock #Y07235 is designed to fit both 1 1/4" and 2" hitch pins and will get you all squared away. However, if there are already locks on your bike rack…

If you wish to convert your Yakima HoldUp Bike Rack for use in a 2-inch hitch you will use the Replacement Tongue #8880580. With this you will need a longer hitch pin, part #Y8890200.