Compatibility Of 1/2 Inch Loom Clamps With 3/8 Inch Loom
Updated 07/10/2017 | Published 07/07/2017
Products Featured in This Question
Question:
Can I use 1/2 loom clamps on 3/8 loom?
asked by: Frank R
0
Expert Reply:
Yes, you can use Metal Loom Clamp - 1/2" # A0500 with Wire Loom 3/8" Diameter # 39035. It will secure the loom to your frame but it will not clamp tightly around it. If you want a tight fit at the clamps you can use 3/4" x 60' Electrical Tape to close the loom at that location and make it your desired thickness for clamping. If you want a perfect fit, I recommend the Wire Loom, 1/2" Diameter (per Foot) # 459075-1.
expert reply by:
Jason S
0
Product Page this Question was Asked From
- Electrical Tools
- Cable Management
- Wire Clips and Clamps
- 1/2 Inch Diameter
- Black
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: How to Connect 4-Way Trailer Wiring with a Wishbone Harness
- Q&A: How To Convert A Wishbone Trailer Wiring Harness To A Regular 4-Flat Trailer Wiring Harness
- Shop: 25 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 25' Ground
- Shop: Wire Loom, 3/8" Diameter, 10' Long
- Shop: Hopkins Endurance Easy-Pull Harness with 4-Pole Flat Trailer Connector - Trailer End - 25' Long
- Video: All About the Wire Loom, 3/8" Diameter, 10' Long
- Q&A: Wiring Instructions for the Tradesman Vaquero Hydraulic A-Frame Trailer Jack
- Q&A: Air Lift or Firestone Air Bags for a 2015 Toyota Sienna
- Q&A: Oil Bath Hub Oil Cap for Pre 1996 Quality Axles 3-1/2 x 14 Thread Pitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Rear Axle Air Spring Kit and Compressor Kit for 2013 Toyota Sienna AWD
- Q&A: Is DeeMaxx EOH Actuator Compatible with 2015 Chevy Silverado 1500 OEM Brake Controller
- Article: Most Popular Wheel Bearings
- Article: Trailer Lighting Requirements
- Article: Which Hitches are Made in the USA
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer