Will The Draw-Tite Class III 2 Inch Hitch # 75099 Fit A 1998 And 1999 Chevrolet C/K Series Truck

Question

Question:

I have a 1999 Chev Classic PU, it was a late 1998 production labeled a 99 even though the chassis is the same as the 98. Will the trailer hitch receiver for the 98 fit it?

asked by: RL G

0

Expert Reply:

The Draw-Tite Class III 2 Inch Hitch, part # 75099, will fit the 1988 to 2000 Chevrolet and GMC C/K Series Trucks. So, it will fit a 1998 and 1999 Chevrolet Classic truck.

Some other items you may need to complete your towing setup are listed below.

Draw-Tite Ball Mount, part # 2753
Pin And Clip, part # PC3
Tow Ready 2 Inch Hitch Ball, part # 19247, or Tow Ready 1-7/8 Inch Hitch Ball, part # 19260
Tow Ready T-One Wiring Harness, part # 118315

I am including a link to the installation instructions on the Draw-Tite hitch and the Tow Ready wiring harness.

expert reply by: Jeff D

0

Answer 1

The hubs that come with the #e82GR axle are packed with a Lithium complex multipurpose grease. It is safe to add marine or equipment grease, as long as it is another Lithium Complex grease. We recommend using something like the Timken Hi-Temp Red…

view full answer...

Answer 2

I would be happy to. I took your information and listed the replacement parts next to it. Inner bearing: 2.362 OD, 1.375 ID, .470 thick. is the Timken Replacement Trailer Wheel Bearing - LM48548 item #TMK79FR and the Timken LM48510 Replacement Race…

view full answer...

Answer 3

All of the hitches you referenced with the exception of part #13028 have been confirmed to fit your 1992 Chevy Pickup. The rest, part #41524, #75033 , and #75099 have all been confirmed as a fit. The main difference between Draw-Tite trailer hitches…

view full answer...

Answer 4

Yes, you will need to go to the product page for the Replacement Hardware Kit #RHK, enter in the part number #75099 and manufacturer, hit Add To Cart and we will ship you the hardware kit you need. I included an installation video for you too.

view full answer...

Answer 5

I checked with Reese and they have no hitch part 36069 showing on their website. I did find it elsewhere on the web but it is discontinued/out of stock. I checked with my contacts at Reese and was able to find out that this item fit various Chevy,…

view full answer...

Answer 6

Since your trailer is very close to 5,000 lbs your total tongue weight is very likely to exceed the 600 lb capacity of the 6k weight distribution hitch, so what you need is the 8,000 lb hitch, and I recommend the Fastway e2 (which is made by…

view full answer...

Answer 7

For a 5000-lb travel trailer with tongue weight (TW) of 450-lbs you can use a weight distribution/sway control system such as the Equal-i-zer 4-Point Weight Distribution System #EQ37060ET which works effectively over a range of trailer TW from 200-…

view full answer...

Will The Draw-Tite Class III 2 Inch Hitch # 75099 Fit A 1998 And 1999 Chevrolet C/K Series Truck

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching