Comprehensive Review: Miro-Flex LED Clearance or Side Marker Light w/ Reflector Video

Our installer here will spray the light with some lubricant around where the light meets the grommet and then will use a screwdriver to pry the light out first, and then the grommet. If you check out the install video I attached you will see this…

The Hopkins 6 Pole to 7 Pole Adapter, #47435, does have a pin for the brake output for a brake controller. This adapter will work for your set up as long as the center pin of the 6-way plug on your RV is for 12v power and the pin in the 10 o clock…

The Optronics Fleet LED Trailer Tail Lights part #TLL12RK which install inside a 6-11/16" x 2-5/8" opening is the closest option we have for you and it comes with the needed grommet and pigtail for installation.

The light dimensions of the Optronics LED #TLL12RK are 7-9/16" long x 2-3/4" tall x 1-3/4" deep and the hole size needed is 6.75" by 2.5 inches. I confirmed this with my contact at the manufacturer and I've attached a template…

I do not have a cross reference chart for Truck-Lite trailer lights, but we have several 2-1/2 inch round clearance lights that may work for you. I have attached a link that will take you to all of our 2 inch and 2-1/2 inch round trailer lights for…

Although the DOT numbers you gave me are codes for what testing was done on the lights, I do have a solution for you. For your 2-1/2" round clearance light we have the Peterson Piranha LED Light #162R with the wiring and grommet as part…

The hubs that come with the #e82GR axle are packed with a Lithium complex multipurpose grease. It is safe to add marine or equipment grease, as long as it is another Lithium Complex grease. We recommend using something like the Timken Hi-Temp Red…

Hi Tyler; we do not have any information on the total length for tongue sections when installing the Fulton Fold-Away Coupler Hinge Kit for 3" x 5" Tongue #FHDPB350101. The only thing Fulton offers is the maximum pivot length and…

Hey Tom. The highest capacity drum brake assemblies we have for a 4 bolt brake flange are the Dexter Electric Trailer Brakes item #23-105-106-09. These are a 6,000 lbs set that are mainly used with AL-KO/Hayes axles. Do you have any part numbers or…

The best way to find the correct electric brakes for a trailer is with the axe capacity which can be found on the axle tag in the center of the beam. The brakes appear to be rather small so the most likely candidate without knowing the capacity is…

I would be happy to. I took your information and listed the replacement parts next to it. Inner bearing: 2.362 OD, 1.375 ID, .470 thick. is the Timken Replacement Trailer Wheel Bearing - LM48548 item #TMK79FR and the Timken LM48510 Replacement Race…

Yes, the Amplock hitch lock part #AMP34FR does work with the Demco Actuator part #DM8204311 that you referenced.