Recommended Propane Hose For 20 lb Cylinder Compatibility To A Quick Connect System  

The fitting you need is a type 1 like the MB Sturgis Propane Hose w/ Back Check - Type 1 x 1/4" MPT - 20" #100473-20-MBS. As far as the regulator, I recommend the Camco Vertical 2-Stage Propane Regulator - 160,000 Btu/Hr #CAM59313. If you…

If I understand your needs correctly, you will need the MB Sturgis Sturgi-Stay T-Fitting for Type 1 Valve - Quick Disconnect and Disposable Cylinder Ports #103613-MBS and the Camco Low-Pressure LP Gas Regulator w/ 12' Long Hose #CAM57721. Then…

Assuming that the 1 pound bottle can be removed and that the regulator on the grille can be used with a 20 pound tank then for a 12 inch supply hose you would need #CAM59053. It has a type 1 ACME nut at one end that connects to an ACME or P.O.L.…

Photos do help identify your propane setup's requirements but since your Intech A-frame toy hauler appears to use a standard 20-lb propane tank you will probably be fine using Automatic Changeover 2-Stage Propane Regulator #CAM59005 along with…

The MB Sturgis Propane Hose w/ Back Check #100473-30-MBS that you referenced does have the back check feature you are looking for. The internal back-check prevents gas from leaking out of the regulator inlet.

The Uneven Rub Rail Trim #36283-955 is going to be the closest trim we have to your trim. This trim is 93-1/2" long, 1-1/2" tall and 5/16" deep. If this is not going to work for you, a local trailer dealer may be able to help you…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

No, they will not but I have a custom fit set that does. They are the Curt item #C16427-204. This set of rails is industry standard so they will work great with your Curt Q20 Slider. The brackets are custom fit and install in pre-existing holes in…

Hi James, To my knowledge the Reese Goosebox is the only replacement option that won't void the frame warranty. That being said, the frame warranty is typically only a year so you really aren't losing much voiding it, especially if you've…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…