Dimensions Of Tow Ready Pintle Hook # C48205
Updated 05/23/2017 | Published 05/22/2017
Products Featured in This Question
Question:
Good Morning, I was wondering if you had a basic 3d model of your 5 ton pintle hitch C48205 that you could send me?
asked by: Chris
Expert Reply:
We don't have a 3D model available, but I'd be happy to give you some measurements of the Curt Pintle Hook, Bolt-On, 10K # C48205. The most notable measurements are the mounting holes. They are 3-3/8 inch center on center measuring horizontally and 1-3/4 inch center on center when measured vertically. This is a standard size to match with a mounting plate/shank like # 63057.
The internal measurement is 1-3/4 inches in diameter and makes almost a complete circle. The outside dimension from the back of the hook to the tip of the hook is 6-3/8 inches. The bolt hole diameter is 17/32 inch. Let me know what other measurements you are looking for.
Product Page this Question was Asked From
Curt Pintle Hook - Bolt On - 10,000 lbs
- Pintle Hitch
- Pintle Hook - Standard
- Adjustable Height
- 10000 lbs GTW
- Bumper Mount
- Plate Mount
- No Shank
- CURT
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Recommended Pintle Hook And Mount With 8 - 10 Inch Rise
- Q&A: Can a Pintle Hook Mount be Used in the Rise and Drop Positions
- Q&A: Is it Safe to Flip the 10 Hole Cushioned Pintle Mounting Bar and Use The Top Set Of Holes To Tow
- Q&A: Troubleshooting Weak Trailer Brakes That Won't Lock Up with Override Lever of Controller Slid
- Article: Pintle-Hitches
- Q&A: Recommended 3 Inch Lunette Ring Over 2-1/2 Inch Alternative
- Q&A: Pintle Hook Recommendation to Fit B&W Pintle Hook Mounting Plate # BWPMHD14002
- Q&A: Recommended Pintle Hook for the Reese RP38186
- Article: Roadmaster Vehicle Specific Base Plates