How to Latch the Roadmaster Falcon 2 All-Terrain Tow Bar # RM-522 Into Storage Position
Updated 03/03/2011 | Published 03/02/2011 >
Question:
I have installed the RM-522 in the 2 receiver but it falls to the ground and does not catch in a horizontal position for storage on the MH when not towing the car. What am I doing wrong?
asked by: Ann G
Expert Reply:
When putting the Roadmaster Falcon 2 All-Terrain Non Binding Tow Bar, item # RM-522, in the storage position while it is mounted in the tow vehicle receiver hitch you will need to put one arm in each hand, like pushing a wheel barrow. Then level the tow bar arms out with the back of the tow vehicle. Next, push the arms fully into the storage position until you hear and feel a click when the arms are vertical or just past vertical. When the Large machine bolt head snaps into the loop at the end of the draw bar it will stay in the storage position and you can rotate the arms to the left or right. New tow bars will become easier to get into storage position after the first few times they have been used.
To Lower the arms you will need to apply a bit of pressure on the arms toward the tow vehicle with one hand, and then push the loop forward while lowering the arms.
This should get the tow bar into and out of storage position. We have a video that shows the tow bar being put into towing position and lowered that should be helpful, see link.
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Article: My Trailer Hitch Doesn't Fit
- Video: How to Install: Curt Trailer Hitch Receiver on your 2011 Mini Countryman
- Video: How to Set Up Your Curt Trailer Hitch Receiver on a 2013 Mini Countryman
- Shop: Front Mount Hitch
- Shop: Trunk Bike Rack
- Q&A: Will Yakima FullBack Bike Rack Work Well On 2013 Mini Countryman
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: E-Bike Rack Recommendation for 1-1/4 inch Trailer Hitch
- Q&A: Platform or Hanging Bike Rack Comparison and Recommendation
- Shop: Curt 2 Bike Platform Rack - 1-1/4" and 2" Hitches - Frame Mount - Tilting
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Video: Feature Breakdown: Blue Ox Trailer Hitch Receiver Lock for 2" Hitches
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Yakima FullBack 2 Bike Rack - Trunk Mount - Adjustable Arms
- Shop: Standard Towbar Hitch Connector for Blue Ox Alpha 2 Tow Bars - 2"
- Shop: Long Towbar Hitch Connector for Blue Ox Avail, Apollo, and Ascent Tow Bars - 2"
- Q&A: Can A Dual Hitch Adapter Be Used In Conjunction With A Hitch Extender For Tow Bar?
- Shop: Base Plate for Tow Bar
- Search Results: trailer hitch
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Article: Trailer Wiring Diagrams
- Search Results: trailer wiring
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Recommended Bike Rack and Dual Hitch Adapter for Carrying E-Bikes While Flat Towing
- Search Results: trailer tires and wheels
