Hitch Opening Down to the Ground on Draw Tite Hitch part # 76046 for 2017 Chrysler Pacifica

Question

Question:

How high off the ground will this hitch be on the Pacifica? I am trying to determine what ball mount I would need to. I will be towing a popup trailer

asked by: Matt

0

Expert Reply:

When we installed the etrailer hitch part # e98903 on a 2017 Chrysler Pacifica we found that from the top of the hitch opening down to the ground the distance was 13 inches. You need to measure from the bottom of your coupler lip when the trailer is level down to the ground. The difference between these two dimensions is the rise/drop you need.

expert reply by: Jameson C

0

Answer 1

The Hidden Hitch by Draw-Tite Trailer Hitch Receiver #DT46GR is the most concealed option for your 2023 Chrysler Pacifica. This allows you to remove the 2" receiver when not needed so you will not see any portion of the receiver below your rear…

view full answer...

Answer 2

Hey Alan, yes the Thule ReVert bike rack part #TH83VA can be used in your Honda Odyssey 2 inch hitch. In the picture I attached you can see that the bikes back wheel is held higher than the shank of the rack so ground clearance should be good but it…

view full answer...

Answer 3

I can't say for sure since it hasn't been tested and we don't have one around to try it out. It would also depend on the actual bikes and bike rack you have. I imagine that as convenient as it may seem it is probably a horrible pain to…

view full answer...

Answer 4

First you will want to verify exactly what trailer hitch receiver you have on your 2017 Chrysler Pacifica. I was able to confirm the list of receivers below will be compatible with your new 2023 Chrysler Pacifica non hybrid. etrailer Trailer Hitch…

view full answer...

Answer 5

What you need for your 2024 Chrysler Pacifica is the Hidden Hitch by Draw-Tite Trailer Hitch Receiver #DT46GR. The cross tube sits behind the rear bumper and the receiver tube is removable. This means it will be completely hidden with no clearance…

view full answer...

Answer 6

There isn't a specific distance you want to have between the bumper of a vehicle and the hitch ball, but in general you'll want more than an inch. This will give you additional leeway when hitching up the trailer so that you don't slam…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

The Draw-Tite Max-Frame Trailer Hitch Receiver item #76046-SK does not interfere with any back up sensors on your 2021 Chrysler Pacifica Hybrid. This is a custom fit hitch that bolts directly to your Pacifica with included hardware. Your hybrid model…

view full answer...

Answer 9

Hi Tim; yes, the Curt RVi Series Shadow 2 Flat Tow Brake System #RVI94FR is compatible with your 2025 Jeep Gladiator. Let me know if you need any help with the rest of your setup. Any big trips coming up with your motorhome?

view full answer...

Answer 10

We have a version of the Draw Tite hitch you referenced that does fit the hybrid models of your 2017 Chrysler Pacifica with the part #76046-SK but the #76046 does not fit the hybrid models.

view full answer...

Answer 11

We do indeed! What you will need is our part number #RHK. All you will need to do is enter the hitch part number (76046 in your case) in the box above the "Add To Cart" button. This will then include all the bolts, washer, nuts, bolt…

view full answer...