Replacement Screen Door Handle Latch For RV

Question

Question:

we have screen door handle latch broken, the part # is 282385, it is mark on it Excel

asked by: Germain L

0

Expert Reply:

To replace your screen door handle latch, I recommend the Lippert Components RV Entry Screen Door Latch - LH # LC201472 or the right hand side # LC201471.

These can be used with the Lippert Components RV Screen Door Frame Striker # LC198287 and the Lippert Components RV Outside Striker for Screen Door # LC198252.

expert reply by: Jason S

0

Answer 1

Hello Jeff, Thank you for reaching out. At this time, we do not offer black non friction door hinges. Our non friction hinge options are currently only available in stainless steel or standard steel finishes. We do not have a non friction hinge in a…

view full answer...

Answer 2

Hey Cliff, with the Replacement Controlled Motion Hinge #LC95VR to get the desired effect where the door doesn't swing open or closed all you have to do is replace is a single hinge and not all three.

view full answer...

Answer 3

The Replacement Entry Door Hinge for RV #LC198295 isn't designed to allow for changes in the leaf order so you'll unfortunately need to fill in the old holes with some sealant and drill new holes to rivet the hinge in place. We also offer a…

view full answer...

Answer 4

Screen door latches are easy to replace. You will simply need the Bi-Directional Screen Door Latch #37206-11865 or the Bullet Door Latch for RV Screen Door #37210785. The access to the latch on the ouside is not covered and from the inside you simply…

view full answer...

Answer 5

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 6

Hey Ray, thanks for reaching out. If you are set on placing the propane tank inside the toolbox, it can be done safely as long as the box is properly vented at the bottom. Propane is heavier than air, so if there is ever a small leak it will settle…

view full answer...

Answer 7

The Forest River Rockwood GEO Pro Trailers have Dexter Torflex Axles so we do have lift kits available. However, there are different lift kits depending on which particular Dexter Torflex Axle you have so you will need to look at the axle tag on the…

view full answer...

Answer 8

Here is a list of all our 15" x 6" wheels with the 5 on 4-1/2" bolt pattern. These wheels are all going to be capable of supporting the 110psi tire pressures. Dexstar Steel Mini Mod Trailer Wheel #AM20545 Aluminum Sendel Series T07…

view full answer...

Answer 9

Sure thing, and what you'll need is a 15" x 6" wheel as that's the size a ST225/75R15 trailer tire will fit. So for one that meets your specs with a 5 on 4-1/2" bolt pattern you can choose from either of the following,…

view full answer...

Answer 10

On the Tekonsha Prodigy P3 Brake Controller #90195 (great choice) the black wire is for 12V power, the blue wire is for brake output to the 7-Way connector, the red wire is for brake switch on the vehicle, and the white wire is for ground. Based on…

view full answer...

Answer 11

Hey Richard, yes the the BAK tonneau cover part #BAK85VR is for sure a fit for your 2000 Chevy Silverado 2500 long bed. Does your truck have the round or square front end? The Silverado generally has the rounder look whereas the C/K was more square.…

view full answer...

Replacement Screen Door Handle Latch For RV

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching